GRAVITY VARI-TILT SP 3202 VT Quick Start Manual

SP 3202 VT
VARI-TILT® STUDIO MONITOR SPEAKER STAND
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
CAUTION
BEFORE USING THE INSTALLATION, PLEASE CHECK THAT THE TRIPOD
IS IN A SECURE POSITION AND, IF NECESSARY, ALSO SECURE IT
AGAINST POSSIBLE TIPPING
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
• Solid cast iron base
• Steel tray with isolating foam strips
• Black powder coating finish
• 30 kg load capacity
• Set of spikes included
DESCRIPTION
The Gravity® studio monitor stand SP 3202 VARI®-TILT features a heavy,
triangular base made of cast iron and a 250 mm × 250 mm steel tray with
isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from
930 mm to 1530 mm for optimum speaker positioning. The stand is supplied
with a set of spikes. Mounted on the large, integrated rubber feet, these
ensure effective coupling to the floor.
SPECIFICATIONS
Product number
Product type
Type
Tubing material
Tubing colour:
Tube surface:
Min. height:
Max. height:
Height adjustment:
Base type:
Base material:
Base edge length:
Lower connector:
Tubing diameter:
Centic load capacity (without spikes):
Centric load capacity (with spikes):
Black ring pack included:
Interchangeable rings:
Weight:
Additional Information:
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
GSP3202VT
Stands and tripods
Speaker stands
Steel
Black
Powder coated
930 mm
1530 mm
Clamp with safety pin
3-point
Cast iron
292.5 mm
M20
42 mm / 35 mm
30 kg
10 kg
Yes
1 × 15 mm, 1 × 20 mm, 1 × 30 mm
7 kg
Including acoustic decoupling spikes
Phone: +49 60 81 · 94 19-0
adamhall.com