Related Manuals for SPRT SP-L37
Summary of Contents for SPRT SP-L37
- Page 1 SPRT SP-L39 Users' Manual SP-L37 Portable Label Printer User's Manual （VER 1.00） www.sprinter.com.cn...
-
Page 2: Table Of Contents
SPRT SP-L39 Users' Manual CONTENT Precautions ............................1 Safety Precautions ........................1 Precautions for use ........................1 Storage Precautions ........................ 2 Chapter 1 Printer Appearance and Model ................... 3 1.1 Appearance ........................3 1.2 Model ...........................3 Chapter 2 Performance Characteristics ..................4 2.1 Printing performance ......................4 2.2 Physical parameters ...................... - Page 3 SPRT SP-L39 Users' Manual 3.5 Printer Restore Default Settings ................... 11 3.6 Printer Connection and Printing ..................12 3.6.1 USB connection ....................12 3.6.2 Bluetooth connection ...................12 3.6.3 WiFi Connection ....................13 3.7 Buzzer description ......................14 3.8 Description of LCD display .................... 14 3.9 Ink screen display instructions ..................
-
Page 4: Precautions
SPRT SP-L39 Users' Manual Precautions Please read this chapter carefully before using the printer! Safety Precautions This printer can only use the special battery and power adapter provided by the company, otherwise it may cause product damage, battery leakage, fire or even explosion. -
Page 5: Storage Precautions
SPRT SP-L39 Users' Manual Too high ambient humidity (above 85% relative humidity) or too low ambient humidity (below 20% relative humidity) can result in poor print quality. Using poor-quality paper or paper that has been stored for an extended period of time may result in poor print quality and even damage to the printer. -
Page 6: Chapter 1 Printer Appearance And Model
SPRT SP-L39 Users' Manual Chapter 1 Printer Appearance and Model 1.1 Appearance 1.2 Model Model Interface SP-L37BTDM USB、Bluetooth SP-L37W USB、WiFi SP-L37BTDMNFC USB、NFC SP-L37WNFC WiFi、NFC... -
Page 7: Chapter 2 Performance Characteristics
SPRT SP-L39 Users' Manual Chapter 2 Performance Characteristics 2.1 Printing performance Printing method: line thermal printing; Printing paper width: 79.5mm±0.5mm; 57.5±0.5mm； Effective printing width: 72mm; 48mm Resolution: 8 points/mm (203dpi); Points per line: 80mm: 576 points/line; 58mm:384 points/line Printing speed: Normal paper: 80mm/s(Max); Label paper: 60mm/s(Max);... -
Page 8: Chapter 3 How To Use
Black mark: Yes (please refer to 4.2 Pre-printed black mark instruction for details) Print control instructions: ESC/POS compatible instruction set/CPCL compatible instruction set (see "SP-L37 Instruction Programming Manual" for details). Power supply mode: 7.4V/1400mAh rechargeable polymer lithium battery. Battery Alarm: When the battery is about to run out, the battery icon on the printer's LCD screen flashes. -
Page 9: Printing Paper Roll Installation
SPRT SP-L39 Users' Manual 3.1.2 Printing paper roll installation 1. Open the paper compartment cover (as shown in Figure 1), slide the paper roll baffle to the outside, and place your fingers in the finger grooves when sliding the baffle (as shown in Figure 2). -
Page 10: Use Of Basic Functions
SPRT SP-L39 Users' Manual 3.2 Use of basic functions Two printing modes: ticket mode and label mode. Three paper types: normal paper, black mark paper and label paper Label mode is divided into: Waybill, voucher and tax receipt. In waybill mode, the default paper type is label paper (80mm paper width). -
Page 11: Paper Feeding (Manual Feeding)
SPRT SP-L39 Users' Manual Entering self-test: In the power-off state, press and hold the [FEED] key, press and hold the [Power] key, and when you hear the "one low, one high" power-on prompt, release the 【Power】 key and then release the 【FEED】 key, the printer's self-test test page will be printed out. -
Page 12: Printer Parameter Settings
SPRT SP-L39 Users' Manual 【FEED】 key, then release the 【MODE】key and the 【FEED】key, the printer enters the hexadecimal printing mode, the LCD displays the hexadecimal mode, and the corresponding information is printed out. Exit hexadecimal printing: Turn off the power or press the【FEED】key three times to exit the hexadecimal printing mode, enter the normal working mode, and print out the prompt information for exiting the hexadecimal mode. -
Page 13: Charging
SPRT SP-L39 Users' Manual 3.2.7 Charging After the printer is used for a period of time, the power of the printer battery will be exhausted. When the battery power of the printer is nearly exhausted, the battery power indicator icon on the LCD screen will flash to give an alarm, and the user needs to charge the battery at this time. -
Page 14: Printer Parameter Settings
SPRT SP-L39 Users' Manual upgrade.You can also use the "SPRT Printer Update Tools" (mobile phone upgrade tool) upgrade tool, to connect Bluetooth or WiFi to upgrade. 3.3 Printer parameter settings The printer can use the special software <setting tool software> to set more parameters through the computer. -
Page 15: Printer Connection And Printing
3.6.2 Bluetooth connection Handheld devices, notebook computers, or other information terminals with a Bluetooth interface can drive SP-L39 to print . The Bluetooth of SP-L37 thermal printer is compatible with Bluetooth 2.0 specification and Bluetooth dual-mode (supports Apple 4.0 and Android... -
Page 16: Wifi Connection
<Setting Tool Software>. SP-L37 thermal printer needs to be paired with the Bluetooth master device that controls the printer before working, and the pairing is initiated by the master device. The usual pairing process is as follows: 1. -
Page 17: Buzzer Description
SPRT SP-L39 Users' Manual 3. If the printer has not been connected to this router before, you need to set up the network first to connect the printer to the router. Network setup procedure: release the [Power] key, press the [FEED] key four times, and then release the [MODE] key. The printer will enter network setup mode and print a message indicating the start of network setup. - Page 18 SPRT SP-L39 Users' Manual ,and ①The respectively indicate: wifi not connected, bluetooth not connected, bluetooth connected and wifi connected. ③Schematic diagram of the current battery level of the printer. Use the icons , respectively, to display the current battery level of the printer, and the icon will flash when the printer battery is low.
-
Page 19: Ink Screen Display Instructions
SPRT SP-L39 Users' Manual for indicating current battery level of the printer. The icon will flash ， when the printer power is low. ④Text prompt display, where the current status of the printer is displayed in text. When the printer and peripherals are not connected, it displays: USB mode. -
Page 20: Nfc Connection
SPRT SP-L39 Users' Manual 3.10 NFC Connection Install the NFC printing software on your NFC-enabled mobile phone (the supporting NFC printing software can be obtained from our company's technical support personnel), enter the content to be printed in the printing software, and place the NFC antenna of the mobile phone close to the NFC sensor as shown in the figure below. -
Page 21: Command Programming Manual
SPRT SP-L39 Users' Manual 4.1 Command Programming Manual <SP-L37 commands Manual> is a technical manual for engineer to develop printer utility, and users can claim our company for it. 4.2 Pre-printed black mark instructions If the user uses a pre-printed black mark for bill positioning, the following black mark pre-printing specifications must be followed when printing the black mark, otherwise the printer may not be able to recognize the black mark. - Page 22 SPRT SP-L39 Users' Manual 1、The length of each receipt is less than 200mm. 2、The gap width is less than 3mm, not more than 30mm. 3、Requirement of receipt shape (rectangle or similar to), irregular shape labels are not supported.
- Page 23 SPRT SP-L39 Users' Manual Appendix A Setting instruction: hit the 【MODE】button to choose “set” item; press it once,the set item will become the next alternative option, and it will print the present value of the chosen item. Hit the【FEED】button to set the value needed, when pressing it once , the value will become the next one in sequence.
- Page 24 SPRT SP-L39 Users' Manual Printing Density： FEED FEED FEED FEED FEED FEED Paper sensitivity setting： FEED FEED FEED FEED FEED FEED FEED 80mm/58mm paper： Label Normal Black FEED FEED Paper Paper Mark FEED Position of black mark： Front FEED FEED...
- Page 25 SPRT SP-L39 Users' Manual FEED Inversion Normal FEED Printing Commands Compatibility： FEED FEED SPMP OTHER ESP/POS FEED Appendix B Setting instruction: hit the【MODE】button to choose “set” item; press it once,the set item will become the next alternative option, and it will print the present value of the chosen item.
- Page 26 SPRT SP-L39 Users' Manual Printing Density： FEED FEED FEED FEED FEED FEED Bluetooth Visible： FEED FEED Beijing Spirit Tech Dev Co.,Ltd. Add: No. 26 Ave. 4, Chuangye Middle Road, Shangdi Information Industry Park, Beijing, CHINA Zip code: 100085, Tel: 010-51661178...
Need help?
Do you have a question about the SP-L37 and is the answer not in the manual?
Questions and answers