Page 1
User’s Manual Axle Boot Spreader 63850 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.
Page 2
To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods. Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler – Germany E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 63850 Page 2 The Tool Experts 10 2022-1...
Page 3
3. To mount an axle boot in an inner joint, turn the boot from inwards to outwards before sliding it onto the arms of the spreader. step Press the + knob until the arms are sufficiently open to apply over the joint. Keep your hands away from moving parts. https://www.XPOtool.com Item 63850 Page 3 The Tool Experts 10 2022-1...
Page 4
There is no routine maintenance for this tool. • Only use original spare parts. Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 63850 Page 4 The Tool Experts 10 2022-1...
Need help?
Do you have a question about the 63850 and is the answer not in the manual?
Questions and answers