Page 1
Pairing Guide Hard of Hearing System FHN800HIA READ & RETAIN THESE PAIRING INSTRUCTIONS...
Page 2
COMPATIBLE ALARMS This Hearing Impaired System can be radio linked (wirelessly) to all FireHawk RF-Link Smoke Alarms (FHB10-RF), Heat Alarms (FHH10-RF), Carbon Monoxide Alarms (CO10-RF), RF-Link equipped Mains Smoke and Heat Alarms (fitted with FHN600RF RF-Link module) and one other Hearing Impaired Control Unit (FHN800HIA).
Page 3
3.2 Put the next device in Linking mode, it will flash red and green for a short time and will beep and stop flashing its lights when linked to the Control Unit. The FHN800HIA will flash yellow to indicate a new device has been linked.
Page 4
Use the internal RF button on the alarm device to access linking mode. 6. DEVICE RESET 6.1 To reset the Control Units (FHN800HIA) press and hold the “Link” Button until all lights will flash sequentially, press the “Link” button again to reset the device. This will blink all lights and return the device to factory settings.
Need help?
Do you have a question about the FHN800HIA and is the answer not in the manual?
Questions and answers