Home Decorators Collection HD0547F Use And Care Manual page 6

Installation (continued)
5
Installing the stem assembly
□
Thread the hex nut end of the stem assembly (C) onto the
coupling (2).
□
Hand-tighten until snug.
7
Installing the shade
□
Place the shade (B) and the previously removed flat washer
(3) over the stem assembly (C).
□
Secure with the previously removed hex nut (4).
□
Hand-tighten until snug.
4
2
C
C
B
3
6
Installing the light bulbs
□
Install the correct bulbs (not included) referring to fixture
markings and/or labels for maximum wattage.
NOTE: Uses two 60W maximum medium base (E26) type "A"
or 9W maximum medium base (E26) self-ballasted LED bulbs
(sold separately).
8
Installing the cap
□
Place the previously removed cap (5) over the stem
assembly (C) extruding from the shade (B).
□
Secure with the previously removed finial (6).
□
Hand-tighten until snug.
6
B
C
5
6