Related Manuals for SACAGAWEA DESIGNS RE-1016
Summary of Contents for SACAGAWEA DESIGNS RE-1016
- Page 1 RE-1016 - General Layout Step 1 10’ Plan View 10’ WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING © 2012 Page 1 of 3...
- Page 2 Step 2 RE-1016 General Information Using You Set-up Instructions: The Visionary Designs Set-up Instructions for Sacagawea displays are created Hex Key Tool Typical Connection Typical Connection specifically for your configuration. They are laid out sequentially, including an exploded view of the entire display and a logical series of detailed steps for assembly.
-
Page 3: Front View
Step 1 RE-1016- Sacagawea - Backwall Assembly Item Qty. Description Steps: Base Plate 1) Attach base plates [1] to lower verticals [2a,3a] with bolts. 2a/2b 42” Vertical Extrusion 2) Connect upper verticals [2b,3b] to lower verticals [2a,3a] with connection bars [b]. - Page 4 Step 2 RE-1016 Wing and Counter Attachment Steps: 1) Attach lights as indicated. 2) Attach assembled counter support [10/11] to vertical where indicated. 3) Attach support leg [10a] to counter support [10/11]. 4) Attach flange plate [11a] to top of curved extrusion [10] as shown.
- Page 5 RE-1016 - Pedestal Assembly Step 3 Part Number Description 38”h Vertical Extrusion 13/13a 12”w Horizontal Extrusion 25”w Horizontal Extrusion Steps 1) Attach horizontal extrusions [13 and 13a] between vertical extrusions [12], placing inserts between horizontals. 2) Attach curved horizontal extrusions [14] between vertical extrusions [12], placing insert between curved horizontals.
Need help?
Do you have a question about the RE-1016 and is the answer not in the manual?
Questions and answers