Page 2
Install the VW884 video output board(s) to video output board slot(s). Give a little push to get the VW784 video input board / VW884 video output board till it is completely seated in the slot. Apply force to each thumb screw head till it is in place, and then tighten the thumb screw by turning it...
Page 3
Removing the I/O Board Alternately loosen each thumb screw. Hold the two thumb screws and then gently pull out the VW784 input board / VW884 output board. Installing Source and Display Devices Optionally install the video input boards/video output boards to the VW3620 for expansion.
Need help?
Do you have a question about the VW784 and is the answer not in the manual?
Questions and answers