Safety Instructions; Operation; Liability And Warranty - Heyner UltraSafe PRO Instruction Manual

GB
7

Safety instructions

• The jack stands may only be used as described in the operating inst-
ructions.
• Improper use can lead to serious injuries and damage.
• Do not make any structural changes to the support stands.
• Do not disassemble the jack stands. Disassembly may lead to subse-
quent malfunctions and defects.
• The maximum load must not be exceeded. If the max. load is excee-
ded, the support stands may be damaged. Risk of serious injury with
fatal consequences.
• The load must be placed in the middle of the saddle.
• The jack stands may only be used on straight and level ground.
• Do not use for boats.
• Remove the jack stands before starting the vehicle. Failure to do so
may result in damage to the product and vehicle.
Before use
Check the jack stands for any transport damage before use.
Check the jack stands before use for cracks, breaks in the weld seams,
missing or damaged parts.

Operation

1. To jack up the vehicle, use the load attachment points specified by the
manufacturer (see vehicle manual).
2. Hold the locking lever up to extend the centre column to the desired
height.
3. Push the locking lever down firmly so that the pawl engages the teeth
of the centre column.
4. The pawl must engage securely with the teeth.
5. insert the locking latch into the locating hole.
6. you can lower the load completely onto the trestles.
Troubleshooting and problem resolution
Do not use the jack stands if they have cracks, deformations or missing
attachments. Maintenance and repairs may only be carried out by quali-
fied personnel.
UltraSafe PRO
H-PREMIUM.
DE
Cleaning and Storage
Clean the jack stands with a dry or slightly damp cloth. Do not use any
harsh cleaners or aggressive chemicals.
Store the jack stands in a dark and dry place. Use the original packaging
for storage. Check the jack stands for damage before each use.
Disposal/environmental information
The packaging is made of environmentally friendly materials that you
can dispose of at local recycling points. In the interest of environmental
protection, do not throw your product in the household waste when it
has reached the end of its service life, but dispose of it properly. You can
find out about collection points and their opening hours from your local
administration.

Liability and Warranty

During the first two years after purchase, you are entitled to the
statutory warranty. If any defects occur, first contact your retailer.
The manufacturer accepts no liability for damage or malfunctions in the
following cases:
• failure to follow the instructions for operation and cleaning;
• improper use;
• technical changes made by the user;
• use of unauthorized spare parts.
Technical data
347420
Capacity per jack stand (kg) 2000
Min. lifting height (mm) 282
Max. lifting height (mm) 430
Weight per jack stand (kg) 2,50
Stand space (mm) 193 x 180
H-PREMIUM.
GB
8
347430 347470
3000 6000
300 400
444 620
3,40 7,00
207 x 188 280 x 250
DE