Content Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. The following icons / symbols are used in this instruction manual: Read instruction manual! Voltage Observe caution and safety notes! Wear safety goggles! Caution –...
Vibrations: 5,58 m / s chipboard or similar plywood-type materials. The required power supply is a 230 V ~ 50 Hz mains Staples / nails circuit (fitted with a maximum 16 A fuse or trip). The device is suitable for use in dry rooms only. Any im-...
Check before connecting the tool to the mains Specific safety advice that the electricity supply circuit is 230 V ~ 50 Hz for this tool and is fitted with a max. 16 amp fuse or trip.
Select the lowest impact force required for stapling. Before you start to use the tool, check that it is You can set the impact force at any value be- in perfect condition.
Operation / Rectifying faults / Maintenance and cleaning / Disposal a particularly hard substrate. Redriving must be car- A staple or nail has been incorrectly driven into ried out directly at each staple or nail. If you do not the material. lift the nose...
ROHS Directive 2002 / 95 / EEC Description of the product: Parkside Electric tacker PET 23 Bochum, 30.04.2006 Hans Kompernaß - Managing Director - We reserve the right to make technical modifications in the course of further development. GB / IE...
Need help?
Do you have a question about the KH 3145 ELECTRIC TACKER and is the answer not in the manual?
Questions and answers