Nvidia GeForce 3 Ti500 Manual
Nvidia GeForce 3 Ti500 Manual

Nvidia GeForce 3 Ti500 Manual

3d graphic accelerator

Advertisement

Quick Links

NVIDIA
GeForce3
Ti500
3D GRAPHIC
ACCELERATOR
MANUAL
2.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GeForce 3 Ti500 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Nvidia GeForce 3 Ti500

  • Page 1 NVIDIA GeForce3 Ti500 3D GRAPHIC ACCELERATOR MANUAL...
  • Page 2: Table Of Contents

    NVIDIA GeForce 3 Ti500 User’s Manual TABLE OF CONTENTS 1. NVIDIA GeForce 3 Ti500 Features ................2 2. GeForce3 Ti500 Board Outline ..................4 2.1 GeForce3 Ti500 using DDR SDRAM (SP7000T5/64M-DVI) ....... 4 3.Hardware installation..................... 5 3.1 Package Contents ..................... 5 3.2 Installing the card...
  • Page 3: Nvidia Geforce 3 Ti500 Features

    1. NVIDIA GeForce 3 Ti500 Features SP7000T2 GeForce 3 Ti500 AGP bus, with 64MB DDR SDRAM on Board Graphics core 256-BIT Fill rate (AA samples/sec.) 3.84 BILLION Operations/sec. 960 BILLION Memory bandwidth 8.0GB/SEC nfiniteFX engine for full programmability Lightspeed Memory Architecture for unmatched performance...
  • Page 4 Operating systems support - Windows XP, Windows 2000, Windows Me, Windows 98, Linux Compatible API Support - OpenGL 1.3 and lower - DirectX 8.1 and lower...
  • Page 5: Geforce3 Ti500 Board Outline

    2.1 GeForce3 Ti500 using DDR SDRAM (SP7000T5/64M-DVI) 64M on board – 4Mx16 DDR SDRAM x8 Power DB15 4M*16 4M*16 ENCODER S-VIDEO NVIDIA GeForce 3 4M*16 BIOS Ti500 4M*16 14.318MHZ NOTE 1: TV output connector and encoder are reserved for optional...
  • Page 6: Hardware Installation

    3.Hardware installation 3.1 Package Contents NVIDIA GeForce3 Ti500 3D Accelerator card CD title or Software diskettes This manual 3.2 Installing the card Turn off your computer Remove the cover of the computer per the owner’s manual Install the card in the AGP bus slots...
  • Page 7: Micro Cross Dvi Connector System

    3.3 Micro Cross DVI Connector System “Micro Cross:”/high speed pins; Analog Red Video Out Analog Green Video Out Analog Blue Video Out Analog Horizontal Sync Analog Common Ground Return (Red , Green , Blue Video Out) Main Pin Field: TMDS Data 2- TMDS Data 2+ TMDS Data 2/4 Shield TMDS Data 4-...
  • Page 8 21. TMDS Data 5+ 22. TMDS Clock Shield 23. TMDS Clock 24. TMDS Clock...
  • Page 9: Resolutions And Colors Supported

    3.4 Resolutions and colors supported: Reference Table based on V21.83 Win9X Driver List GeForce3 Ti500 B.P.P. Refresh Rates (HZ) 60/70/72/75/85/100/120/140/144/150/170/200/240 640*480 60/70/72/75/85/100/120/140/144/150/170/200/240 60/70/72/75/85/100/120/140/144/150/170/200/240 60/70/72/75/85/100/120/140/144/170/200/240 800*600 60/70/72/75/85/100/120/140/144/170/200/240 60/70/72/75/85/100/120/140/144/170/200/240 60/70/72/75/85/100/120/140/144/150/170/200/240 1024*768 60/70/72/75/85/100/120/140/144/150/170/200/240 60/70/72/75/85/100/120/140/144/150/170/200 60/70/72/75/85/100/120/140/144/150/170/200 1152*864 60/70/72/75/85/100/120/140/144/150/170/200 60/70/72/75/85/100/120/140/144/150 60/70/72/75/85/100/120/140/144/150/170 1280*960 60/70/72/75/85/100/120/140/144/150/170 60/70/72/75/85/100/120/140/144/150 60/70/72/75/85/100/120/140/144/150/170 1280*1024 60/70/72/75/85/100/120/140/144/150/170 60/70/72/75/85/100/120/140/144/150...
  • Page 10: Smart Installation

    4. Smart Installation For Windows XP, Windows 2000, Windows 98, Windows ME 4.1 Put the DRIVERS CD in your CD-ROM 4.2 Click Driver installation 4.3 If everything fine, screen will show Confirm Installation window. Then Select OK...
  • Page 11 4.4 Now appears the Driver Confirmation window Select Install If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”, still you can force to install. 4.5 Then restart your computer.
  • Page 12: Manually Install Windows Xp Drivers

    11. Then show Browse for Folder Select E:\drivers\ NVIDIA\7X00\winXP Note: “E:”-> CD Drive, “NVIDIA”-> VGA chip brand name, “7X00”-> VGA model name Then select OK and then click Next 12. If no problem occur, system will start to install the driver 13.
  • Page 13 Click on the pull-down arrow from the Color palette area to select color depth or adjust the sliding bar to either Less or More from the Desktop area Select OK to restart System and new color depth or the new resolution takes effect.
  • Page 14: How To Change Refresh Rate In Windows Xp

    5.3 How to Change Refresh Rate in Windows XP Make sure that you have installed windows XP Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel Inside the Control panel group , click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings choose Monitor Click on the Refresh Rate sub window to change refresh rate...
  • Page 16: Nvidia Utility In Windows System

    5.4 NVIDIA Utility in Windows System 5.4.1 GeForce3 Ti500 Display Adapter Information Table, you can tell the BIOS and Drivers version, NVIDIA Chip model name, IRQ setting and many useful information. Additional properties is for advance user to setting OpenGL, DirectX and other settings.
  • Page 17: Device Selection

    5.4.2 Device selection Select output device, if all the optional connector is connected, you will be able to select DVI or TV output as Windows default display device. Geforce3 Ti500 do not support TwinView. Only the device is plugged and functional, then you will be able to check the selection box. If you plug the connector after window boot up, click Detect Displays will functional the plugged output device check box.
  • Page 18: Color Correction

    5.4.3 Color correction This Window shows NVIDIA Digital Vibrance is functional and you can adjust Brightness, Contrast, Gamma and save it as your favorite setting. If you don’t like your adjustments, you can also check Automatically apply these settings at startup to change it back.
  • Page 19: Manually Install Windows 98 And Windows Me Drivers

    Please select Brows 11. Then show Browse for Folder tab Select E:\drivers\ NVIDIA\7X00\Win9X (or \Winme) Note: “E:”-> CD Drive, “NVIDIA”-> VGA chip brand name, “7X00”-> VGA model name Then select OK 12. Then show Update Device Driver Wizard tab Select CD-ROM driver...
  • Page 20 Select OK to restart Windows System and new color depth or the new resolution takes effect.
  • Page 21: How To Change Refresh Rate

    Please specify the drivers location at your CDROM letter: \drivers\NVIDIA\7000\win2000 or the directory where you put your drivers Select Install and click “YES” when the Installing Driver dialog box appears. If the drivers is very new may not certified by Microsoft, if so, system will prompt you the...
  • Page 22 drivers do not have “digital signature”, still you can force to install. A message appears stating that drivers were successfully installed. Click OK. Another message appears stating that the driver could not be restarted dynamically. Restart Windows2000 to run the new driver. Click OK.
  • Page 23: Fcc Statement

    FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
  • Page 24: Trademark Acknowledgments

    Trademark Acknowledgments All brand names and trademarks are the property of their owners. FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition.(1).this device may not cause harmful interference. (2).this device must accept any interference received, including interference that may cause undesired operation Warning:...
  • Page 25 Notice: (1) An Unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord by used. (2) Use only shielded cables to connect I/O devices to this equipment.3 (3) Changes or modifications not expressly approved by the party responsible for compliance could void the use’s authority to operate the equipment.

Table of Contents