Sansui CD-X501i Service Manual

SERVICE MANUAL
SANSUI
DX50Olz
CAUTION
1. Parts identified by the A\ symbol on the schematic diagram and the parts list
are Critical for safety.
Use only replacement parts that have critical characteristics recommended by
the manufacturer.
2. Make leakage-current or resistance measurements to determine that exposed
parts are acceptably insulated from the supply circuit before returning the appli-
ance to the customer.
SPECIFICATIONS
Format .........0.ceeceseeeeees Compact disc digital audio Power consumption ........ 16 watts
Pick-up ...........::00 .... 3-beam, semiconductor laser Dimensions .................... 448 mm (17-11/16") W
No. of channels ... 2 channels (stereo) 98 mm (3-7/8") H
Decoding (D/A) 16-bit linear 317 mm (12-1/2") D
Frequency response......... 4 Hz~20 kHz +0.3 dB Weight ............0:ccceeeeeees 5.4 kg (11.9 lbs) net
Total harmonic distortion.. Less than 0.003% (1 kHz)
Signal-to-noise ratio (S/N) . Better than 106 dB Remote controller: RS-1020
Dynamic range................ Better than 97 dB Control system................ Infra-red ray pulse system
Wow and flutter Below measurable limit Power requirements ........ DC 3V
Output voltage/load impedance Dimensions .................... 63 mm (2-1/2") W
Norma! output (LINE OUT) 18 mm (3/4") H
eilecssncessesesiwsdventeee 2V/10 kohms 148 mm (5-7/8") D
Digital output (DIGITAL OUT) ; Weight ...........ccceeeesees 115 g (0.3 Ibs)
sicaneghevvodesdecueresssteaae 0.5+0.1Vp-p/75 ohms including dry batteries
Headphones.............45 45 mW (variable maximum)/ STilet acd wicanees say Sed ae re e e
with 32-ohms load peace pecith Ons subje io Changes without notice for im
Power requirements ........ AC 120V/220V/240V, * Due to local laws and regulations, this unit sold in some areas are not
50/60 Hz equipped with variable voltage selecitors.
For U.S.A. & Canada.. AC 120V, 60 Hz