The Extended Menu "Advanced Menu - Sennheiser SR 2000 IEM - ANNEXE 1 Instruction Manual

Display
To change the treble and bass of the audio output signal, proceed as follows:
Activating/deactivating the automatic lock mode – "Auto Lock"
Menu
Sensitivity
PEAK PEAK
0 0
Mode
-10 -10
-20 -20
Easy Setup
-30 -30
Frequency Preset
-40 -40
AF AF
Name
Call up "Auto Lock"
Equalizer
Auto Lock
Advanced
Exit
The lock mode prevents that the plug-on transmitter is accidentally switched off or
programed during operation. The lock mode icon
the lock mode is activated. For information on how to use the lock mode, refer to page 14.
The extended menu
Setting the transmission frequencies and the frequency banks "U1" to "U6" –
Advanced Menu
"Tune"
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Frequency range
300 Hz - 1 kHz
1 - 3 kHz
3 - 10 kHz
Turn the jog dial to boost or cut the frequency range.
Press the jog dial to change to the next frequency range or to store the complete
entry.
Menu
Equalizer
Auto Lock
Advanced
Inactive
Turn the jog dial to select the desired setting.
"Advanced
When you have selected one of the system banks and then select the "Tune" menu,
the transmitter automatically switches to channel 1 of the frequency bank "U1". In
this case, "U1.1" briefly appears on the display panel.
Upon delivery, the channels of the frequency banks "U1" to "U6" are not assigned a
transmission frequency.
When you are in the "Tune" menu item, the RF signal is deactivated.
Adjusting settings via the operating menu
PEAK PEAK Auto Lock
0 0
-10 -10
Inactive
-20 -20
-30 -30
-40 -40
AF AF
Select the desired
setting
"Stored"
on the standard display indicates that
Menu"
PEAK PEAK Auto Lock
0 0
-10 -10
Active
– 18 dB
-20 -20
-30 -30
-40 -40
AF AF
Store the setting
25