Subscribe to Our Youtube Channel
Related Manuals for VOVO VB-6000SE
Summary of Contents for VOVO VB-6000SE
- Page 1 ※ Please register your product at vovo-eu.com/pages/product-registration ★ to receive full warranty benefit.★...
- Page 6 Stainless Steel Nozzle...
- Page 7 Stainless Steel Nozzle...
- Page 8 Please plug in the power only after completing all installation and opening the water valve.
- Page 11 In power saving mode, if left unused for more than 1 hour, both the water temperature and seat temperature are reduced by one level compared to their current settings. When the product is used again, the temperature will return to the original temperature setting.
- Page 12 En mode économie d'énergie, si vous ne l'utilisez pas pendant plus d'une heure, la température de l'eau et celle du siège seront maintenues à un niveau inférieur d'un cran par rapport aux réglages d'origine pour économiser de l'énergie. Lorsque vous utiliserez à nouveau le produit, la temperature reviendra à...
- Page 13 - Si no se utiliza durante más de 1 hora en el modo de ahorro de energía, tanto la temperatura del agua como la del asiento se reducen en un nivel en comparación con su ajuste actual. - Cuando se vuelva a utilizar el producto, la temperatura volverá...
- Page 14 - Wenn das Gerät im Energiesparmodus länger als 1 Stunde nicht benutzt wird, werden sowohl die Wassertemperatur als auch die Sitztemperatur im Vergleich zu den aktuellen Einstellungen um eine Stufe reduziert. - Wenn Sie das Gerät wieder verwenden, wird die Temperatur wieder auf die ursprüngliche Einstellung zurückgesetzt.
- Page 15 - In modalità di risparmio energetico, se lasciato inutilizzato per più di 1 ora, le temperature dell'acqua e del sedile vengono abbassate di un livello rispetto alle impostazioni attive. - Quando il prodotto viene utilizzato di nuovo, le temperature tornano al livello precedentemente impostato.
- Page 17 Is the bidet power on? Unplug the power cord, wait for 5 minutes, (Check the power LED on the display panel.) then plug it back and check the power. If the power+power-save LED on the main unit are flashing together, it indicates a water supply issue.
- Page 18 Have you replaced the remote control Please replace with new batteries and check batteries? the polarity. Have you inserted them correctly? The water Is the temperature set to a low level, or is it Adjust water temperature with Seat Temp turned off? button on the remote control or the side is cold.
- Page 19 drying air Adjust the air temperature with Dry Temp Is the air temperature set to low level? temperature button on the remote control or the side control panel. is low. The air The drying function will operate for 3 minutes Press Dry again.
- Page 20 Power Is the unit unplugged or is there a power Plug in the unit or wait for the power to be saving outage? restored. is not If the power-save LED on the main body is turned off, press the STOP button on the side working.
Need help?
Do you have a question about the VB-6000SE and is the answer not in the manual?
Questions and answers