Table of Contents
Advertisement
Quick Links
Issue 2008-05-08
Product description
SBM51/01 Gateway for Grundfos Pump Systems
Application
The SBM51/01 Gateway for Grundfos Pump Systems integrates bus-ca-
pable pumps into the DDC3000 and DDC4000 automation and control
systems.
Pumps with a Grundfos bus are supported, e.g. the UPE2000, TPE2000,
and Magna series. One SBM51/01 integrates a maximum of 8 pumps.
The switch cabinet bus is used to communicate with the DDC system.
Contents
Information about the product description .........................................................................................................2
Safety instructions ...........................................................................................................................................2
Qualified technicians........................................................................................................................................2
Item....................................................................................................................................................................3
Technical data .................................................................................................................................................3
Dimensions ......................................................................................................................................................3
Connection.......................................................................................................................................................3
Mounting ............................................................................................................................................................5
Commissioning ..................................................................................................................................................5
Setting the switch cabinet bus address ...........................................................................................................5
Switching on the power....................................................................................................................................6
Änderungen vorbehalten - Contents subject to change - Sous réserve de modifications - Reservado el derecho a modificación - Wijzigingen
voorbehouden - Con riserva di modifiche - Innehåll som skall ändras - Změny vyhrazeny - Zmiany zastrzeżone - Возможны изменения -
A változtatások jogát fenntartjuk - 保留未粳通知而改动的权力
Kieback&Peter GmbH & Co. KG
Tempelhofer Weg 50, 12347 Berlin/Germany
Telefon: +49 30 60095-0, Telefax: +49 30 60095-164
www.kieback-peter.de, info@kieback-peter.com
SBM51/01 Gateway for Grundfos Pump Systems
A
Datasheet 2.50-40.051-01-EN
Page
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kieback&Peter SBM51/01
Summary of Contents for Kieback&Peter SBM51/01
-
Page 1: Table Of Contents
DDC3000 and DDC4000 automation and control systems. Pumps with a Grundfos bus are supported, e.g. the UPE2000, TPE2000, and Magna series. One SBM51/01 integrates a maximum of 8 pumps. The switch cabinet bus is used to communicate with the DDC system. Contents Page Information about the product description ......................2... -
Page 2: Information About The Product Description
SBM51/01 Gateway for Grundfos Pump Systems Information about the product description The description contains information about use and installation of the product "SBM51/01 Gateway for Grundfos Pump Systems". If you have any questions that are not covered by the product description, contact the supplier or manufacturer for further information. -
Page 3: Item
Data Sheet 2.50-40.051-01-EN SBM51/01 Gateway for Grundfos Pump Systems Product description Item SBM51/01 Gateway module for Grundfos pump systems Technical data Nominal voltage AC 24 V ±10%; approx. 5 VA Fuse Electronic fuse protection for AC 24 V Display and controls... - Page 4 Data Sheet 2.50-40.051-01-EN Product description SBM51/01 Gateway for Grundfos Pump Systems At the end of the switch cabinet bus (furthest point from the central unit, max. 200 m), the two con- nection lines must be fitted with a terminating resistor of about 180 Ω (terminating resistor is included with the central unit).
-
Page 5: Mounting
This product description describes specific settings and function of the SBM51/01. In addition to these instructions, the product descriptions of other system components, such as the pumps, are to be observed.Before the commissioning of the SBM51/01, the data bus address of the pump must be configured. -
Page 6: Switching On The Power
Please ensure that this process complies with VDE guide- lines and local wiring regulations. Before switching on the power, ensure that the device has been mounted correctly and check the electrical connection. After turning on the power, check the transmission function of the SBM51/01. Page 6 / 6...
Need help?
Do you have a question about the SBM51/01 and is the answer not in the manual?
Questions and answers