Attaching The Bodypack Transmitter To Clothing - Sennheiser SK 300 G3 Instruction Manual

Putting the bodypack transmitter into operation
ME 4
Use the microphone clip
clothing (e.g. tie, lapel).
The ME 4 clip-on microphone has a cardioid pick-up pattern.
Position the ME 4 so that its sound inlet is directed
towards the sound source (e.g. mouth).
Attaching the bodypack transmitter to
clothing
You can use the belt clip
mitter to clothing (e.g. belt, waistband).
The belt clip is detachable so that you can also attach the
bodypack transmitter with the antenna pointing down-
wards. To do so, withdraw the belt clip
points and attach it the other way round.
The belt clip
fixing points accidentally.
To detach the belt clip:
Lift the belt clip as shown.
Press down the belt clip at one fixing point and pull it
out of the transmitter housing.
Repeat for the other side.
10
to attach the bodypack trans-
is secured so that it cannot slide out of its
to attach the microphone to
from its fixing