Page 2
Introduction Thank you for purchasing the refrigeration product. In order to obtain the maximum benefit and use of this product, please read these instructions completely before attempting to install or use this product. Your new refrigeration product is manufactured with advanced production techniques. Every product is inspected before shipment and tested to ensure operator safety and product quality.
Safety Tips • To obtain full use of the cabinet, the cabinets including the following models: • Position on a flat, stable surface. • A service agent/qualified technician should carry out installation and any repairs if required. Do not remove any components or service panels on this product.
1. Remove the appliance from the packaging. Make sure that all protective plastic film and coatings are thoroughly removed from all surfaces. (include foam board between back condenser and box body). 2. Ensure the polystyrene packaging block is removed from behind the Black wire condenser mounted on the rear of the cabinet 3.
Press this key and the display will show the set temperature. Press the Key again to return to normal reading. Set new temperature: Press this Key and the display shows the set temperature. Prss this key to increase the set temperature. Pres this key to lower the set temperature.
Weight Range (liters) W×D×H (mm) (Kg) 220-240V 50Hz 0.55A 595×650×830 KXR200 0°C ~ 10°C KXF200 220-240V 50Hz 0.5A -10°C ~ -22°C 595×650×830 Electrical Wiring Appliance are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard. The plug is to be connected to a suitable mains socket.
• Neutral wire (coloured blue) to terminal marked N Earth wire (coloured green/yellow) to terminal marked E • All appliances must be earthed, using a dedicated earthing circuit. If in doubt consult a qualified electrician. Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required they must be readily accessible.
EU regulations require refrigeration product to be disposed of by specialist companies who remove or recycle all gasses, metal and plastic components. Consult your local waste collection authority regarding disposal of your appliance. Local authorities are not obliged to dispose of commercial refrigeration equipment but may be able to offer advice on how to dispose of the equipment locally. Compliance Parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent, and federal authorities.
Need help?
Do you have a question about the KXR200 and is the answer not in the manual?
Questions and answers