1 Safety warnings 1.1 Warning Warning : risk of fire I flammable materials TH IS appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments;...
Page 4
REFRIGERANT and cyclopentane foaming material used for the appliance are flammable. Therefore, when the appliance is scrapped, it shall be kept away from any fire source and be recovered by a special recovering company with corresponding qualification other than be disposed by combustion, so as to prevent damage to the environment or any other harm.
1.2 Meaning of safety warning symbols 。 This is a prohibition symbol. Any incompliance with inst「uctions ma rked with this symbol may result in dama ge to the product or endanger the personal safety of the use「. Proh心lion symbol 。 This is a warning symbol It is required to operate in strict observance of instructions marked with this symbol;...
Page 6
1.4 Warnings for using • Do not arbitrarily disassemble or reconstruct the refrigerator, nor damage the refrigerant circuit; maintenance of the appliance must be conducted by a specialist • Damaged power cord must be replaced by the manufacturer, its maintenance depa「tment or related professionals in order to avoid danger.
Page 7
三 Freezing chamber @ • Do not store beer, beverage o other fluid contained in bottles or 「 enclosed containers in the freezing chamber of the refrigerator; or otherwise the bottles or enclosed containers may crack due to freezing to cause damages 夕...
2.2 Levelling feet Schematic diagram of the levelling feet (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributo「) Adjusting procedures: a. Turn the feet clockwise to raise the refrigerator, b.
Page 10
2.3 Door Right-Left Change(optional) List of tools to be provided by the user Putty knife Cross screwdriver thin-blade screwdriver 5/16” Masking tape socket and ratchet 1. Power off the refrigerator, and remove all objects from the door trays. 2. Dismantle upper hinge cover, upper hinge and hole cap of the other side, remove the refrigerating door. hole cap upper hinge cover upper hinge...
Page 11
4.Dismantle the bottom hinge, hole caps and screws, Install the bottom hinge shaft and adjust foot on other side of the bottom hinge, then install the hinge on the other side shaft shaft screw screw cap hole cap 5.Dismantle the screw, sleeve pipe and stopper from the refrigerating door and freezer door, Then install them on the other side of the doors in order.
Page 12
hinge cover hole cap upper hinge (The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor) Light source in this product is replaceable only by qualified engineers. 2. Remove the lampshade with 1.
Page 13
3 Structure and functions 3.1 Key components LED lighting Door tray (The plCture above lSonIy for reference The actuaI confIguratlOn WIII depend on the physical product or statement by the distributor) Refrigerating chamber • The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumed in the short term,suggested storage time 3days to 5days.
Page 14
Note: The quick-freezing function is designed to maintain the nutritional value of the food in the freezer. It can freeze the food in the shortest time. If a large amount of food is frozen at one time, it is recommended that the user turn on the quick-freezing function and put the food in.
Page 15
4. Maintenance and care of the appliance 4.1 Overall cleaning • Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving. • Check the door gasket regularly to make sure there are no debris. Clean the door gasket with a soft cloth dampened with soapy water or diluted detergent.
5.1 Trouble shooting You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department.
Page 17
The ordered parts in the following table can be acquired from channel:...
Page 18
CATA ELECTRODOMÉSTICOS, S.L. Oficinas: c/ Anabel Segura, 11, Edif. A, 3a pl. 28108. Alcobendas. Madrid. España Fábrica: c/ del Ter 2, Apdo. 9. 08570. Torelló.Barcelona. España T . +34 938 594 100 - Fax +34 938 594 101 www.cnagroup.es - cna@cnagroup.es Atención al Cliente: 902 410 450 / +34 938 521 818 - info@cnagroup.es...
Need help?
Do you have a question about the EFC-1821 NF WH /B and is the answer not in the manual?
Questions and answers