Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Gozney Arc Stand
Summary of Contents for Gozney Arc Stand
- Page 1 Technical Manual...
- Page 2 This section details the process of building the stand and the correct installation of Arc Stand.
-
Page 4: Cautions And Warnings
Cautions & Warnings Placing hot items from the oven onto Ensure you have fully read, understood the wooden shelves may damage them, and comply with the cautions & warnings use appropriate protection to avoid in the Arc Users Manual supplied with damage. - Page 5 Ensure you’re using a Gozney supplied gas connector or one that complies with the Standard for movable gas appliances (ANSI Z21.69 / CSA 6.16),...
- Page 6 This section details the process of building the stand and the correct installation of Arc Stand.
- Page 8 Build Manual 3ft 827/32” 1139mm 4ft 63/16” 1376mm 3ft 105/16” 1176mm 3ft 51/32” 1042mm 2ft 95/32” 2ft 51/2” 850mm 749mm BUILD AREA Build the stand in front of the area you intend to position Arc. Ensure the ground is stable and level and capable of supporting the oven’s weight.
-
Page 9: What's In The Box
What’s In The Box SCALE 1:1 F002 F003 F004 F005 F006 F001 M6X14 M6X11 M8X8 M8X30 Bolt Bolt Spacer Washer Washer Thumbscrew... - Page 10 Step 1 F006 F002 FIXINGS We recommend not fully tightening the bolts until the frame has been assembled. This will ease the alignment of future fixings. Fully tighten at Step 5.
- Page 11 Step 2 F006 F002...
- Page 12 Step 3 F006 F002...
- Page 13 Step 4 F006 F002...
- Page 14 Step 5 FIXINGS Tighten all fixings on the stand. Ensure to only use hand tools to prevent overtightening.
- Page 15 Step 6 F005 F003...
- Page 16 Step 7...
- Page 17 Step 8 F004 F001 INSTALLING ARC 1/8” Before installing Arc, assemble fixings F004 and F001 into the top of the stand. Don’t fully tighten these two fixings, there needs to be around 1/8” (4mm) of thread exposed.
- Page 18 Step 9 INSTALLING ARC Ensure fixing F004 and F001 are assembled into the stand before installing the oven. Remove anything loose from the oven before moving. Two people should pick up Arc from the rounded ends of the oven as shown. Never lift Arc on your own.
- Page 19 Step 10 WARNING It is important for the safe usage of Arc or Arc XL that the gas bottle is secured to the oven as specified in the instructions below. LPG BOTTLE SETUP Remove F001 and replace with the eye bolt and chain that is in the box.
Need help?
Do you have a question about the Arc Stand and is the answer not in the manual?
Questions and answers