Subscribe to Our Youtube Channel
Related Manuals for Appion AV 760
Summary of Contents for Appion AV 760
- Page 1 TO REDUCE THE RISK OF INJURY OR PRODUCT DAMAGE, READ OPERATION MANUAL PRIOR TO OPERATING PRODUCT. PATENT INFO AT APPIONTOOLS.COM - ©2024 APPION INC. ALL RIGHTS RESERVED...
- Page 3 Do not connect to systems under pressure. Do not use leaky or damaged batteries. Use only specified batteries and cleaning agents. Battery operating temperatures may vary by manufacturer. The batteries supplied with this unit are for storage and operating between 32°F - 104°F (0°- 40°C) Dispose of batteries in accordance with any applicable local laws and regulations.
-
Page 5: General Functions
General Functions Button Configuration... - Page 6 Using the AV760 CAUTION: Do NOT connect the AV760 to systems under high pressure. While the AV760 is designed to withstand accidental exposure to positive pressures, continued exposure may cause permanent damage. 1. Using the 45° Swivel Vacuum Connector (included), connect the AV760 to an available service port furthest from the vacuum pump.
- Page 7 1. With the AV760 powered on, press and hold the Bluetooth button until the Bluetooth symbol appears on the AV760 screen. 2. In the Appion Central™ App, navigate to “My Devices” and connect to the AV760 as shown. 3. If the connection is lost due to exceeding the Bluetooth range, or due to loss of power, repeat Step 1, then “Reconnect”...
- Page 9 2. Inspect the knurled fitting and o-ring for damage or excessive wear. Replace the o-ring if damage is suspected. If the knurled fitting is damaged, contact Appion directly. 3. Inspect the fitting tip for debris buildup and ensure the ball check valve within the knurled fitting moves freely and is clear of obstructions by shaking the fitting and l...
- Page 10 General Maintenance & Care (cont.) 4. Inspect the oil catch filter for oil by blotting it on a clean paper towel. If any oil remnants appear, discard the oil catch filter and replace with a new one. 5. Apply a small amount of vacuum grease to the knurled fitting o-ring and hand-tighten the fitting onto the s sensor housing.
-
Page 11: Advanced Cleaning
Advanced Cleaning WARNING: Please follow the General Maintenance and Care procedures outlined previously BEFORE attempting the advanced cleaning procedures. WARNING: Do not touch or insert any objects into the sensor ports. Doing so may permanently damage the sensors. 1. Remove the knurled fitting with o-ring, then the oil catch filter from the sensor housing. -
Page 13: Specifications
Specifications Range: 760,000 microns to 1 micron Accuracy: ±5% of reading + 10 microns (1 to 5k) ±5% of reading (5k to AM) High Resolution: 1 micron (1 to 142,999) 50 micron (15,000 to ATM) Low Resolution: 1 micron (1 to 14,999) 50 micron (2k to 5k), 250 (5k to 15k) 1k (15 to ATM) Units:... - Page 14 Specifications (cont.) Weight: 6.9 oz. (196 g) *without batteries Gauge Dimensions: 4.65 x 2.75 x 1.2 in. (118 x 70 x 30 mm) Fitting: 1/4 in. Male Flare Maximum Overpressure: 400 psi Operating Temperature: 0° to 140° F (-17.8° to 60° C)
- Page 16 Regulatory Information (cont.) FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s...
- Page 18 Appion AV760 Warranty Registration Card Register by Mail: Appion Inc. 2800 South Tejon Street Englewood, CO 80110 USA...
Need help?
Do you have a question about the AV 760 and is the answer not in the manual?
Questions and answers