Adjusting the headband ..............10 Switching the PX 210 BT on/off ............ 11 Connecting the PX 210 BT to the audio source ......12 Connecting the PX 210 BT using the audio cable ....... 15 Using the PX 210 BT ................. 16 Adjusting the PX 210 BT to the listening situation ....
• Only use the supplied mains unit and charging cable. • To reduce the risk of fire or electric shock, do not use the device and the mains unit near water and do not expose them to rain or moisture.
Page 4
Safety instructions for the Lithium-Polymer battery pack If abused or misused, the battery pack may leak. In extreme cases, it may even present • a heat hazard, •...
Page 5
With apt-X audio coding, you can be assured of crisp, pure and full stereo sound. It allows you to not only hear, but experience and feel the audio as it was intended. Utilizing apt-X, Bluetooth technology can now offer wireless audio quality that is indistinguishable from the highest quality wired connection.
1 PX 210 BT headphones 1 BA 370 PX battery pack 1 USB charging cable 1 PSC 03R-050 mains unit with country adapters 1 audio cable (2.5 mm to 3.5 mm jack plug) 1 transport case 1 quick start guide 1 CD ROM with –...
Pictogram Meaning Briefly press this button. Keep this button pressed for 4 seconds. Keep this button pressed until the desired setting is made or the desired action is completed. Meaning of the pictograms for the flashing of the LED Pictogram Meaning This pictogram symbolizes a flashing.
Before using the PX 210 BT for the first time, remove the protection strip from the battery pack. Charging the battery pack Before using the battery pack for the first time, charge it for at least 3 hours. When charging the battery pack, the LED on the battery pack lights up red.
Page 10
Connecting the charging cable to the battery pack You can charge the battery pack either inside or outside the headphones. This is helpful if you are using a spare battery pack (to be ordered separately). To charge the battery pack...
Connecting the charging cable to the mains unit, to a PC or to other USB devices In order to charge the battery pack, you can connect the charging cable to either the USB socket of your PC or the supplied mains unit or to other USB devices. To connect the charging cable...
The headphones will try for 3 minutes to connect to one of the up to 8 previously paired audio sources. If this fails, the headphones automatically switch off after 60 minutes.
If you pair the headphones with a ninth audio source, the saved connection profile of the first Bluetooth device will be overwritten. If you want to re- establish a connection with the first audio source, you have to pair the headphones with this audio source again.
3 times red and you hear a descending beep. The headphones will then try for 3 minutes to connect to one of the up to 8 previously paired audio sources. If this fails, the headphones automatically switch off after 60 minutes.
Press any button on the headphones to display the current setting of the Bluetooth function. To disconnect the Bluetooth connection to the audio source, you can switch off the headphones or the Bluetooth function. This setting is retained until the Bluetooth function is switched on again.
Detaching the audio cable If you want to use the PX 210 BT only as Bluetooth headphones, you can detach the audio cable Pull the 2.5 mm jack plug of the audio cable from the socket the headphones.
3 times red. You hear a descending beep. Bluetooth button goes off. The flashes blue and the Bluetooth function is switched off. Changing the volume The PX 210 BT allow you to change the volume of the audio signal: Button Duration Function Button Duration Function...
Remote-controlling the audio source from the PX 210 BT If your headphones have a Bluetooth connection to an audio source (e.g. iPod, MP3 or CD player), you can use the PX 210 BT to remote-control the audio source as follows:...
Using the PX 210 BT Resetting the settings of the PX 210 BT You can reset all settings of your headphones to the factory default settings. This allows you to prevent that other users of the headphones can access your Bluetooth enabled devices. You can then pair 8 new devices with the headphones.
Transporting the PX 210 BT Transporting the PX 210 BT For space-saving transportation, the headphones can be folded up flatly and compactly. Rotate the ear cups by 90°. Tuck the ear cups between the headband. Place the headphones flat into the transport case.
Only use a soft, slightly damp cloth to clean the headphones. Replacing the ear pads You can replace the ear pads. Spare ear pads are available as accessories (see “Accessories and spare parts” on page 22). Grasp the edge of the ear pad behind the ear cup and peel it up and away from the ear cup.
Headphones The pairing does not Check if the audio source supports cannot be paired work. the A2DP profile. If not, use one of the optional dongles. The audio source is Switch the audio source on switched off. (see page 12).
Accessories and spare parts Accessories and spare parts The following PX 210 BT accessories are available from your specialist dealer: Cat. No. Accessory/spare part 531404 Ear pads, 1 pair 531405 Headband padding, 1 pair 525776 PSC 03R-050 mains unit with 4 country adapters...
With apt-X audio coding, you can be assured of crisp, pure and full stereo sound. It allows you to not only hear, but experience and feel the audio as it was intended. Utilizing apt-X, Bluetooth can now offer wireless audio quality that is indistinguishable from the highest quality wired connection.
Page 26
• Dynamic range of >92 dB for 16 bit audio and >120 dB for 24 bit audio. • The overall framework of apt-X ensures a high degree of resilience to random bit errors, with the bit error response well matched to the auditory response of the human ear.
Fax: +1 (860) 434 1759 declare the above device comply with the requirements of Federal Communications Commission. This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference, and 2) This device must accept any interference received, including interference that may cause undesired operation.
Page 28
Manufacturer Declarations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 29
Sennheiser electronic GmbH & Co. KG. ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronics GmbH & Co. KG is under license. ® ® iPod and iPhone are registered trademarks of Apple Computer, Inc.
Need help?
Do you have a question about the PX 210 BT and is the answer not in the manual?
Questions and answers