Connecting The Px 210 Bt Using The Audio Cable - Sennheiser PX 210 BT Instruction Manual

1
1

Connecting the PX 210 BT using the audio cable

Connecting the audio cable
You can connect the headphones to the audio source using the audio
cable if
• you do not want to use the Bluetooth function,
• you are not allowed to use the Bluetooth function (some airlines do not
allow Bluetooth transmission)
or
• the battery pack is flat.
When the audio cable is connected to the headphones, the
Bluetooth function cannot be switched on.
If the headphones are already connected to the audio source via
the Bluetooth interface, the Bluetooth connection is automatically
disconnected when you connect the audio cable. The
3 times red and you hear a descending beep.
Connect the 2.5 mm jack plug of the audio cable to the socket
headphones.
Connect the 3.5 mm jack plug of the audio cable
socket of your audio source.
When the audio cable is connected to your audio source, you hear the
sound from your audio source and the
Detaching the audio cable
If you want to use the PX 210 BT only as Bluetooth headphones, you can
detach the audio cable .
Pull the 2.5 mm jack plug of the audio cable
the headphones.
When detaching the audio cable, the Bluetooth function is
not automatically switched on.
Switch the Bluetooth function on again (see "Switching
the Bluetooth function on/off" on page 16).
Putting the PX 210 BT into operation
LED flashes
to the headphone
LED flashes blue.
from the socket
DE
EN
FR
IT
of the
ES
NL
of
15