Related Manuals for Holman 70070
Summary of Contents for Holman 70070
- Page 1 Installation Guide 70070-70073 Holman Rancho Cordova, CA 95742 800-343-7486 InstallationSupport@Holman.com 20231207R2 DATE: ________________...
- Page 2 Step 3 – Window Guard Installation ....................3 Before You Begin • Read all instructions prior to assembling or installing any Holman product. • Always locate your installation locations prior to performing any work. • Have rack preassembled before installation of window guard.
- Page 3 Instructions – 70070, 70073 Parts List Step 1 – Prepare Upper Tube Clamps 1/32” Thick Tape Strip This step assumes installation to service body rack with 2” diameter upper leg cups. If mounting top clamp to a smaller diameter tubing, install additional thicker rubber spacers per Step 2 instructions before installing clamp.
- Page 4 Instructions – 70070, 70073 Step 3 – Window Guard Installation • Determine installation position and take note of approximate location of holes in top and bottom of window guard. • Squeeze one tube clamp around the top of each of the front legs, at about the position of the hole noted above, with flat end of flange away from the cab.
Need help?
Do you have a question about the 70070 and is the answer not in the manual?
Questions and answers