Advertisement
Quick Links
Advertisement
Related Manuals for PureMate PM 410
Summary of Contents for PureMate PM 410
- Page 1 10L COMPRESSOR DEHUMIDIFIER Model No: PM 410 INSTRUCTION MANUAL...
- Page 2 Thank you for purchasing the innovative PureMate 10L Dehumidifier PM 410. We wish you many years of healthy indoor air with this efficient and effective product. SAFETY GUIDELINES ALWAYS use the appliance only on the voltage specified. NEVER immerse the product or power cable with water or other liquids.
- Page 3 NEVER tilt, move, or attempt to empty tank while it is operating. Ensure the dehumidifier is in an upright position. NEVER cover or restrict airflow to the dehumidifier whilst in use. Dispose of collected water, this is NOT suitable for drinking. When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well, and store it in dry cool place.
-
Page 4: Symbols Explained
The maximum refrigerant charge amount is 45g. In the rare occurrence the unit should malfunction, DO NOT attempt any repairs. All repairs are required to be taken out by a professional. Please contact PureMate Customer Services. SYMBOLS EXPLAINED Please read instruction manual For indoor use only and retain for future use. - Page 5 COMPONENTS 1. Control Panel 2. Power cord 3. Filter 4. Water tank 5.Caster Wheels 6. Air Inlet 7. Air Outlet CONTROL PANEL UV/ION SPEED TIMER DISPLAY SETTING POWER...
- Page 6 OPERATING INSTRUCTIONS POWER BUTTON: Press to turn ON/OFF the dehumidifier. FAN SPEED: Press to select between high speed and low speed. HUMIDITY SETTING: Set the desired relative humidity level between 40% to 80% at 5% intervals. After a period of working, when relative humidity level is lower than the set humidity by 2%, the compressor will stop and the fan will continue for 3 minutes.
- Page 7 - Set the dehumidifier to turn ON: When the dehumidifier is off, press the timer button until you reach the desired number of hours before you want it to turn on. - Set the dehumidifier to turn OFF: When the dehumidifier is on, press the timer button until you reach the number of hours before you want it to turn off.
- Page 8 DRAINING THE COLLECTED WATER When the drainage tank is full, the tank full indicator light will turn on, the operation will stop automatically and the buzzer will beep 15 times to alert the user, that the water need to be emptied from the drainage tank.
- Page 9 2. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use detergent, scouring pads, chemically treated dust cloths, gasoline, benzene, thinner, or other solvents, as these can scratch and damage the tank and cause water leakage 3.
- Page 10 CLEANING & MAINTENANCE Cleaning the Dehumidifier To clean the Body Wipe it with a soft damp cloth To Clean the Air Filter 1.Open the inlet grill firstly and washed with water 2. Attach the air filter Insert the filter into the grill smoothly Storing the Dehumidifier When the unit is not being used for a long period of...
-
Page 11: Specifications
SPECIFICATIONS Power Supply: 220-240V 50Hz Power Consumption: 205W Water Tank Capacity: 2.0L Working Temperature: 5-35 Net Dimensions: 27 x 20.5 x 40.8 cm Net Weight: 9.5kg DISPOSAL OF THIS DEVICE This symbol on the product and/or packaging indicates that waste Electrical Waste Electrical and products (WEEE) under Directive 2012/19/ Electronic Equipment... - Page 12 Model NO: PM 410 10L COMPRESSOR DEHUMIDIFIER Super Tech Health Limited 129 Shady Lane Great Barr Birmingham West Midlands B44 9ER United Kingdom WWW.PUREMATE.CO.UK...
Need help?
Do you have a question about the PM 410 and is the answer not in the manual?
Questions and answers