Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PureMate PM 410
Summary of Contents for PureMate PM 410
- Page 1 10L COMPRESSOR DEHUMIDIFIER Model No: PM 410 INSTRUCTION MANUAL...
- Page 2 Thank you for purchasing the innovative PureMate 10L Dehumidifier PM 410. We wish you many years of healthy indoor air with this efficient and effective product. SAFETY GUIDELINES - ALWAYS use the appliance only on the voltage specified. - NEVER immerse the product or power cable with water or other liquids.
- Page 3 – The maximum refrigerant charge amount is 45g - In the rare occurrence the unit should malfunction, DO NOT attempt any repairs. All repairs are required to be taken out by a professional. Please contact PureMate Customer Services. SPECIFICATIONS Power Supply:...
- Page 4 CONTROL PANEL UV/ION SPEED TIMER DISPLAY SETTING POWER OPERATING INSTRUCTIONS POWER BUTTON: Press to turn ON/OFF the dehumidifier. FAN SPEED: Press to select between high speed and low speed. HUMIDITY SETTING: Set the desired relative humidity level between 40% to 80% at 5% intervals.
- Page 5 REMOVING AND EMPTYING THE WATER TANK 1. Lightly press on the sides of the tank with both hands and pull the tank out gently. 2. Discard the collected water. NOTE 1. Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water level correctly without the float and water may leak from the water tank.
- Page 6 CONTINUOUS DRAINING The unit features a continuous drainage port .Using a plastic pipe (with an inner diameter of 10mm) inserts into drain hole (on intermediate plate), reach out from side of water tank, install it in place, and arrange the drain pipe. The water in the drainage tank can be continuously drained out from the continu- ous port on the unit.
Need help?
Do you have a question about the PM 410 and is the answer not in the manual?
Questions and answers