Related Manuals for Syvio SY-H001
Summary of Contents for Syvio SY-H001
- Page 1 #SY-H001# INSTRUCTON MANUAL Warm & Cool Mist Humidifier Please read this manual carefully before use and keep it properly for future reference.
- Page 2 NAMED OF PARTS Mist outlet Humidity sensor LED display Function button Top cover LED light Water tank LED light Waterproof Silicone Transducer Sleeve Essential Oil tray PTC Heater Air outlet Power cord...
-
Page 3: Function Characteristics
FUNCTION CHARACTERISTICS A. Power Button Press button A to turn the humidifier ON and OFF. B. Turbo Mode High mist volume setting, fasten fan speed and heating function are all turned on. C. Mist Volume When it is on, the unit will default to the medium mist output. 1st press: high mist output. 2nd press: low mist output. -
Page 4: Romote Control
will stop working, until the room humidity is lower than the humidity value set by the unit, the unit will start to work. F. Heating Mode Press button F to switch heating ON/OFF. G. Timer Setting Press button G to determine the operating time, it can be set 1-12 hours or for continuously operation. -
Page 5: General Cleaning
CLEANING Note: Always unplug the unit before servicing in any way. GENERAL CLEANING • Inside the base of the unit. Pour excess water out of the unit, take out the aromatherapy box and close the cleaning cap. Wash out the unit with fresh water using the cleaning brush and a soft cloth as needed. - Page 6 2. Remove the tank and empty all the water in the base and tank. 3. Locate the ultrasonic disk on the inner center of the base unit. 4. Use ONLY the enclosed cleaning brush to gently clean disk and remove build up and deposits.
- Page 7 Power ≤90W Voltage AC 120V 60Hz Mist Volume Cool Mist 300ml/h Max Warm Mist 500ml/h Max Working Time Cool Mist: 50H(low mist), 20H(high mist) Warm Mist: 30H(low mist), 12H(high mist) Capacity Timer 1H-12H Size 249(L) x 172(W) x 315(W) mm INSTRUCTIONS FOR USE Select a firm and flat location - at least six inches (15 cm) from any well or wall or object for proper air flow.
- Page 9 CARE & MAINTENANACE Do not add hot water, only suitable for cold water. Please use the original power cord. Always unplug the power cord from electrical outlet before filling. Essential oil should not come in contact with the exterior surface of unit. Do not submerge unit into water to avoid risk of exterior surface of unit.
-
Page 10: Troubleshooting
Get Help Fast “Thanks for purchasing the SYVIO Product!” If there is any problem, please contact us for a replacement or refund. Also, register your order id for an EXTRA 3-months warranty! Support Email: support@mysyvio.com”...
Need help?
Do you have a question about the SY-H001 and is the answer not in the manual?
Questions and answers