Syvio SA3300296 Instruction Manual

Syvio SA3300296 Instruction Manual

Cool mist humidifier

Advertisement

SA3300296 # INSTRUCTION MANUAL
Cool Mist Humidifier
Please read this manual carefully before use and keep it properly for future reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SA3300296 and is the answer not in the manual?

Questions and answers

Michele S
April 3, 2025

Where would I find a brush to clean the air intake? Do I have to unscrew the bottom panel? Is this common, I've only had less than 1yr from amazon & really love, it just stopped producing mist.

1 comments:
Mr. Anderson
April 3, 2025

The manual states to clean the "air intake" with a dry brush under the base but does not mention the need to unscrew the bottom panel. It also does not specify where to find the brush. Therefore, you do not need to unscrew the bottom panel, and you can use any suitable dry brush.

This answer is automatically generated

Summary of Contents for Syvio SA3300296

  • Page 1 SA3300296 # INSTRUCTION MANUAL Cool Mist Humidifier Please read this manual carefully before use and keep it properly for future reference.
  • Page 2: Names Of Parts

    NAMES OF PARTS Atmosphere light Mist outlet Water tank Top cover Power Button Humidity Button Mist Button Timer Button Overflow hole Air outlet Max Water Level Line Power Cord Ceramic Disc Air inlet...
  • Page 3: Function Characteristics

    FUNCTION CHARACTERISTICS ■ Power Button: On the stand-by state: 1st Press: Turn on the medium mist with two mist icon indicators light on, blue LED light on. 2nd Press: Turn off the humidifier. Note: When waterless, the display will shows “E2” error code and the waterless icon light will flash with buzzer warning 3 times (around 7S), and then will power off;...
  • Page 4 ■ Timer Button: On working state: 1st Press: Display will shows the current setting timer, if no timer setting will shows “--”H. 2nd Press: Reset the timer, display shows “02” with timer icon “H” light on, and the unit will power off after 2H 3rd Press: Display shows “04”...
  • Page 5 6th Press: Setting the 80% humidity, display shows “80” with humidity icon “%” light on. 7th Press: No humidity setting, display shows “--” with humidity icon “%” light on. Cycle control. Note: 1. After finishing the humidity setting, the display will show the real-time humidity after finishing the setting.
  • Page 6 ■ Waterless protection function: When lacking water, the display will shows “E2” and the waterless icon light will flash with buzzer warning 3 times (around 7S), and then will power off; If you press again, it will repeat the flash and the warning again. ■...
  • Page 7 INSTRUCTIONS FOR USE Place unit on a flat, water-resistant surface as moisture may cause damage to carpet, finished floors, furniture, or walls. 1. Remove the Top Cover from the Water Tank. 2. Fill the Water Tank with tap water up to the Max Water Level Line.
  • Page 8 Power Button Humidity Button Mist Button Timer Button...
  • Page 9: Care And Maintenance

    CARE & MAINTENANCE Do not add hot water, only suitable for cold water Please use the original power cord Always unplug the power cord from electrical outlet before filling. Essential oil should not come in contact with the exterior surface of unit.
  • Page 10: Troubleshooting

    Clean the "air intake" with a dry brush under the base has dirt Get Help Fast "Thanks for purchasing the SYVIO product! If there is any problem, please contact us for a replacement or refund. Also, register your order id for an EXTRA 12-months warranty!

Table of Contents

Save PDF