Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Sennheiser HME 43-3 - 01-09
Summary of Contents for Sennheiser HME 43-3 - 01-09
- Page 1 HME 43-3 HME 43-3S Instruction manual...
-
Page 2: Safety Instructions
Always include this instruction manual when passing the headset on to third parties. The headset is capable of producing sound pressure levels exceeding 85 dB(A). In many countries 85 dB(A) is the maximum legally permissible level for continuous noise exposure during the working day. Exposure to... - Page 3 “Safety instructions”. using the headset within the operating conditions as described in this instruction manual. Improper use means using the headset other than as described in this instruction manual, or under operating conditions which differ from those described herein.
-
Page 4: Delivery Includes
Extremely comfortable to wear due to the patented two-piece automatic headband and soft earpads ActiveGard™ safeguards you from the effects of an acoustic burst Flexible microphone boom, can be worn on either left or right-hand side Noise-compensating microphone ensures excellent speech transmission Delivery includes... -
Page 5: Operation
Operation Wearing the headset Adjust the length of the headband to fit your head size or shape. Note: The earpads should exert a slight pressure on the ears. Holding the headset with two hands, carefully bend the headband to adjust it to a snug but comfortable... - Page 6 Turning the microphone boom The microphone boom can be rotated. This allows the headset to be worn with the microphone boom positioned on either the left or right-hand side of the head. Positioning the microphone Bend the flexible microphone boom so that the micro- phone is placed at the corner of the mouth.
- Page 7 Replacing the wind screen If the wind screen shows signs of wear such as tears or holes, replace the wind screen. Pull the wind screen from the microphone. Gently slide-on the new wind screen. Notes: In order to avoid pop noise, always use the...
- Page 8 Adjusting the volume directly on the audio system Connect the headset to the corresponding sockets of your audio system. Adjust the volume directly on the audio system. Hearing damage due to high volumes! CAUTION! This headset is capable of producing high sound pressure levels.
- Page 9 Storage and transportation Turn the microphone into the position shown in the diagram. Rotate the earcups by 90°. Use the supplied carrying bag for storage and transportation.
-
Page 10: Care And Maintenance
Care and maintenance Cleaning the headset Use a soft, slightly damp cloth to clean the headset from time to time. If the headset is very dirty, use a cloth dampened with mild, soapy water. Danger of short-circuit due to the ingress of... -
Page 11: Cable Assignment
CAUTION! may damage the new earpads. Grasp the edge of the foam earpad behind the earcup as shown and peel it up and away from the earcup. Slide the new earpad onto the earcup. Repeat for the other earcup. Cable assignment... -
Page 12: Product Variants
Cat. No. 091551 Leatherette earpads Cat. No. 091532 Foam earpads Cat. No. 091529 Wind screen Cat. No. 091540 Carry bag Cat. No. 517619 Headband padding (1 pair) Cat. No. 529726 Pad for temple support Cat. No. 532729 (HME 43-3S only) -
Page 13: Specifications
HME 43-3S Connection cable single-sided round cable, length 1.90 m Weight without cable approx. 95 g Operating temperature –5 °C to +45 °C Storage temperature –55 °C to +70 °C Headphones Transducer principle dynamic Frequency response 100 Hz to 6,000 Hz... - Page 14 MKE 43 Transducer principle pre-polarized condenser, noise compensating Frequency response 400 Hz to 4,500 Hz Output voltage 300 mV/Pa at a distance of approx. 2 cm (1") between microphone and mouth (factory pre-set); adjustable from 40 to 500 mV/Pa Supply voltage 8 to 16 V DC 150 to 2,200 Ω...
-
Page 15: Manufacturer Declarations
Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner. CE Declaration of Conformity This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EU. - Page 16 Sennheiser electronic GmbH & Co. KG Printed in China Am Labor 1, 30900 Wedemark, Germany Publ. 01/09 www.sennheiser.com 528263/A03...