Usb-c metal nano docking station triple display 2x dp, hdmi, lan + pd 100 w (150 pages)
Summary of Contents for i-tec TB3HDMIDOCKIT
Page 1
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per i-tec TB3HDMIDOCKIT cerca il tuo prodotto tra le migliori offerte di Schede di Memoria e Lettori Thunderbolt™ 3 Docking Station 1x 4K HDMI / 1x Gigabit LAN / 2x Thunderbolt™ 3 / 5x USB-A 3.0 / 1x SD Card Reader / 1x Combo Audio Jack User’s guide...
Page 2
DESCRIPTION Front panel: 1. LED indication – shows green when power on 2. Thunderbolt™ 3 LED indication – shows blue when Thunderbolt™ device is connected 3. SD Card Reader 4. USB-A 3.0 port with fast charging, specification BC 1.2 5. USB-A 3.0 port 6.
INTRODUCTION Thank you for purchasing the i-tec Thunderbolt™ 3 Docking Station, our product allows you to connect your favourite devices via a Thunderbolt™ 3 connector to a laptop with a Thunderbolt™ 3 port. The docking station provides 1x HDMI 4K port, 2x Thunderbolt™ 3 port, 1x Ethernet GLAN RJ-45 port, 5x USB-A 3.0 port (incl.
Thunderbolt™ 3 Docking Station DRIVER INSTALLATION Windows 10 32/64bit: After connection, the drivers for the docking station are installed automatically on the system. Before installation make sure that your system has installed the latest drivers for your device and updated BIOS.
Quick Start AUDIO CONFIGURATION By default, when the docking station is connected to a computer, the audio configuration may be changed to USB (Multimedia) Audio Device automatically (this setting depends on models). If it does not work, follow the steps below to setup. 1.
Page 6
Thunderbolt™ 3 Docking Station A. Windows OS Position the mouse anywhere on the Windows Desktop, Right-click and select Display Settings.
Page 7
Quick Start Extend mode 1. Refer to the Multi-monitor configuration section to bring up the configuration window. 2. Select the preferred monitor at top of the page. 3. Select Multiple Displays > Extend these displays. 4. Click Apply to confirm and exit.
Page 8
Thunderbolt™ 3 Docking Station 5. Once the setting is completed, simply drag and drop the application icons or the opened windows to the add-on monitor. However, some applications may not support to display on the extended desktop. Troubleshooting Cursor disappeared – if the status remains in the extended mode but the docking station is disconnected, the desktop will still be panned to the add-on monitor.
Quick Start To switch to Mirror Mode, tick the box in front of Mirror Displays. SAFETY INSTRUCTIONS Do not expose to extreme temperatures and air humidity. ź Use the device on flat surfaces – this will prevent it from slipping and potentially causing ź...
Thunderbolt™ 3 Docking Station FREQUENTLY ASKED QUESTIONS Question: On my MacBook 13" / 15" 2016 and later, wi-fi or Bluetooth stops working; or USB 3.0 devices connected to the docking station disconnect. Where is the problem? Answer: This problem is caused by interference in the range of 2.4GHz. A possible solution is to connect the docking station to the Thunderbolt 3 (USB-C) port of the Mac on the left side nearest to you or use the ports on the right side.
Quick Start European Union Only Note: Marking is in compliance with EU WEEE Directive This equipment is marked with the above recycling symbol. It means that at the end of the life of the equipment you must dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream.
Need help?
Do you have a question about the TB3HDMIDOCKIT and is the answer not in the manual?
Questions and answers