Page 1
A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Connect the corded handset cord to the corded handset and the base unit until you hear a click. Note: L Use only the supplied Panasonic AC adaptor PNLV226. Charger Connect the AC adaptor to the power outlet.
Handset battery installation/Handset battery charging Charge for about 7 hours. Note: L USE ONLY rechargeable Ni-MH batteries AAA (R03) size (1). L Do NOT use alkaline/manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm “Charging”...
Page 3
Operating tips Handset Base unit {<} {>} Date and time (Handset/Base unit) {MENU}(1)1 Enter the current month, date, and year. s {OK} Enter the current hour and minute (12-hour clock format). Proceed with the operation for your unit. Handset: *: Select “AM” or “PM”. s {SAVE} Base unit: {AM/PM}: Select “AM”...
Page 4
L The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Holdings Corporation is under licence. L All other trademarks identified herein are the property of their respective owners.
Page 5
Using a Bluetooth Headphone Connecting/disconnecting a Bluetooth headphone Headphones that are on can be connected automatically with the paired handset, while headphones that are off will be disconnected from the handset. If the headphones do not connect automatically or if you want to use them with another Bluetooth device, you may need to connect/disconnect them manually.
Page 6
Using a Bluetooth Headphone Answering calls with your headphone During an incoming call, you can answer the call in the following situations: N If the headphone is already connected and it rings: Press {PAIR} or press your headphone’s button referring to your headphone’s operating instructions to answer the call.
Basic operations Making/Answering calls (Handset/Base unit) Making calls Handset: Dial the phone number. s {TALK/s} Base unit: Dial the phone number. s Lift the corded handset, or press {s}. Answering calls Handset: {TALK/s} Base unit: Lift the corded handset, or press {s}. To hang up Handset: {OFF} Base unit: Place the corded handset on the cradle.
Frequently asked questions Question Cause/solution Why is _ displayed? L The handset is too far from the base unit. Move closer. L The base unit’s AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it. Handset: {MENU}(13) Base unit: Press and hold {LOCATOR} for about 5 seconds.
Need help?
Do you have a question about the KX-TGF892C and is the answer not in the manual?
Questions and answers