System Configurations - Sennheiser EM 203 Instructions For Use Manual

MANIPULATION
Choose the option to set the display (ch. 4.1.1).
Depress
to return to the display mode.
Use
or
to select the parameter to be indicated.
Scrolling is stopped by keeping
depressed.
NOTA BENE
Depress
to return to the previous level.
This key also serves to stop data entry in case
of errors.
EM 203, Publ. 10/94 engl

System configurations

and identification data
FUNCTION
The receiver specifications are stored in every
single module:
The display indicates the
SET
MODEL/SERIES
•
•
Y
SERIAL NUMBER OF THE MODULE
Every module has a serial number to facilitate
N
its identification. The serial number cannot be
changed.
FREQUENCY RANGE OF THE MODULE
The display shows the standard frequencies or
frequency ranges.
SET
SOFTWARE VERSION
Shows the version of the software used.
HARDWARE VERSION OF THE MODULE
1 Version of the analog section
2 Version of the digital section
ESC
CUSTOMER-SPECIFIC TEXT
It is entered by Sennheiser electronic KG or
your Sennheiser distributor, if ordered.
DIVERSITY
A
EM 1046-U-L
UHF ( 450 - 790 MHz)
EM 1046-U-H
UHF ( 630 - 960 MHz)
(information for Sennheiser's Service
Department or Sennheiser distributors)
(information for Sennheiser's Service
Department or Sennheiser distributors)
MENU
B
Y
N
SET
ESC
DISPLAY
4.1.7
(RX)
31