Toro eTimeCutter 75642 Setup Instructions
Hide thumbs
Also See for eTimeCutter 75642:
- Operator's manual (72 pages) ,
- Operator's manual (408 pages)
Advertisement
Quick Links
eTimeCutter® Riding Mowers
Model No. 75642—400000000 and Up
Model No. 75851—400000000 and Up
Model No. 75841—400000000 and Up
© 2023—The Toro
®
Company
8111 Lyndale Ave So
Bloomington, MN 55044
Register at www.Toro.com
Setup Instructions
Original Instructions (EN)
Printed in the USA
All rights reserved
3463-610A
*3463-610* A
Advertisement
Related Manuals for Toro eTimeCutter 75642
Summary of Contents for Toro eTimeCutter 75642
- Page 1 Riding Mowers Model No. 75642—400000000 and Up Model No. 75851—400000000 and Up Model No. 75841—400000000 and Up Setup Instructions *3463-610* A © 2023—The Toro ® Company Register at www.Toro.com Original Instructions (EN) 8111 Lyndale Ave So Printed in the USA...
- Page 2 Installing the Back Cushion Machines with MyRide® Suspension System Only Parts Required Seat back Hex-flange bolt 1. Slide the seat back on to the seat-base posts and align the holes. 2. Secure the seat back using 4 hex-flange bolts and 4 nuts. Torque the bolts to 19.7 N∙m (14.5 ft-lb).
- Page 3 Attaching the Seat-Tilt Cable Non-MyRide Machines Only 1. Tilt the seat back partway. 2. Attach the seat-tilt cable from inside the seat pan. G459389 Seat-tilt cable 3. Lower the seat. Setting Up the Motion-Control Levers 1. Locate the motion-control levers attached, but folded down on the machine. 2.
- Page 4 Completing the Setup Parts Required Operator’s Manual Operator training material Checking the Mower Adjustment Adjust the side-to-side level and the front-to-rear blade slope. Use the relevant procedures in the Operator’s Manual to verify that the deck is level, and make any adjustments as necessary.
Need help?
Do you have a question about the eTimeCutter 75642 and is the answer not in the manual?
Questions and answers