Changing The Phonebook - emcom IP6030 Series Installation, Operation, And Programming Manual

4.1.2 Changing the IP Address, Subnet Mask and Default Gateway
Using the left pane navigator, click on WAN. The navigation tree will expand and three selection
buttons will appear in the right pane. Make sure that the Static IP Address button is selected.
In the navigation tree, click on Static IP Settings. The following screen will appear:
Change the IP Address, the Subnet Mask and the IP Gateway to the desired settings and click on
apply. The IP6030 will automatically enter the new values and will restart itself. Since the IP6030
has been restarted, the connection to the browser will have been lost. The connection is re-
established by again entering the IP address in the browser access line.

4.1.3 Changing the Phonebook

The phonebook of the IP6000 is changed by clicking on VoIP Line Settings in the navigation tree
pane and then by clicking on Phonebook in the submenu. The following window will appear:
947214 Rev. F Page 9 of 15 03 June 21
IP6030 Family Rugged, Handset VoIP Phones
Installation, Operation and Programming V3