Cautions for safety Warning For safe use, please stick to the following cautions. · Please, save this manual after reading these instructions carefully. Warnings for Usage · Read and understand all instructions to set up rightly. · Do not give any damage, break and modify the plug. Overloading, heating, pulling causes the damage. ·...
Installation Name of Each Part FRONT SIDE BACK Dummy Main body Screw Wrench Audio AUDIO LOBBYPHONE EXTENSION UNIT (OPTION) Lobbyphone Extension C-Mic Terminal for extension (Option) Speaker House connection terminals Name indicator-shows house information Volume control (audio lobbyphone) Call button Volume control (KIP-304) ※...
Components Product Specifications Audio Lobbyphone Dummy Screws Specifications KAL series / KEL series “L” Wrench Wrench screw 2EA Input power DC+12V±1V(Stand by : 1W, Operating : 8W) Communication method Hands free method (Two way) Dimensions 125(W) X 220(H) X 30(D)mm Screws Operating temperature -10℃...
Button Configuration - Cabling is 3 wires in common & 1 separate wire. For 1 separate wire connection for each house using ‘8 pin connecter’, please refer to the numbers shown next to the buttons & detailed wiring diagram at page 10 and 11. - Extension units are compatible with any of audio lobbyphone.
Adapter Wiring Connection Extension Wiring Connection Yellow : COM Brown : N.C Black : N.O Black : GND ※ Provided as connected : Not Used : 12V ※ Provided as connected ※ Terminal for door opener (Extra adaptor is needed) Door opener should be used based on the door release/lock (Normal open or Normal close).
Page 11
2) If this product breaks down during proper use as a result of product defect, KOCOM will repair it within one year from date of purchase free of charge. 3) The following cases will be subject to charge, even during warranty period : a.
Need help?
Do you have a question about the KAL-T308 and is the answer not in the manual?
Questions and answers