Habitat BOULLE JAPONAIS PAPER FL Care & Instruction Manual

Care & Instruction Manual
For household and indoor use only.
Please read and retain these instructions for future reference
Safety Warning
•
Read these instructions carefully and familiarize yourself with the procedure before assembling
the unit.
•
Take all the components and fittings out of the protection materials and separate them into
their groups.
•
Ensure you have enough space to lay out all the parts before assembly.
•
Always be sure to use the correct type and wattage of bulbs as indicated on the fitting.
Do not exceed the maximum stated wattage.
•
To avoid scratching it is recommended that you assemble the unit on a soft level surface.
•
When changing the bulb, always switch off at the mains and allow the old bulb to cool down
before handling. Dispose of used bulbs carefully.
•
This luminaire is Class II insulated.
•
The luminaire is designed for INDOOR USE ONLY.
•
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is
damaged ,the luminaire shall be destroyed.
Assembling
1.Remove all protective materials from the package and place the lamp parts on a smooth surface.
2.Take the lamp holder○ 1 up from the bottom of the base, connecting the lamp holder with two
metal bracket ○ 2 &○ 3 together by screwing the lamp holder ring○ 4 tightly.
3. Screw tightly the rob○ 6 into the top metal bracket○ 3 washer hole.
4. Insert the above completed assembling part into the bottom of the lamp base bracket as figure
1,screw tightly by nut○ 7 .
5.Put the LED ES/E27 bulb○ 5 (10W max.) onto the lamp holder (bulb not included).
BOULLE JAPONAIS PAPER FL
4745495