Advertisement
Quick Links
Installation Instructions
Model:
Description:
Part Number:
Assembly Time:
Before you begin, read through these instructions and check that
all parts are present. Always disconnect negative battery terminal,
prior to installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
No.
1
GMR-LED with Housing (MBQT-RAD-1)
1
Bojo Tool
2
Panel Clip Pliers
3
10mm open box wrench
4
10mm and 12mm socket
5
½" socket
6
Rachet
7
Small flat head screwdriver
8
Phillips screwdriver
9
3mm and 5mm Allen Wrench
10
¼" and ½" drill bit or stepper bit
11
1" hole saw
12
Drill
13
Rotary tool similar to a Dremel
14
Heat Gun or Lighter
15
Crimper
Honda Talon
Radio Install
MBQT-RAD-1
60 Min (1-Hours)
Parts List
Component Name
Tools Required
Page 1 of 7
Qty
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MB QUART MBQT-RAD-1
Summary of Contents for MB QUART MBQT-RAD-1
- Page 1 Assembly Time: Before you begin, read through these instructions and check that all parts are present. Always disconnect negative battery terminal, prior to installation. Please note that MB Quart cannot assume any responsibility for damage resulting from incorrect installation. Parts List...
- Page 2 Disassembly ● Remove hood by turning two latches ● Remove four 10mm bolts, four push pins, and five 5mm allen bolts to remove top of dash ● Remove half mud guard with six push pins Page 2 of 7...
- Page 3 Radio & Dash Kit Installation ● Place the metal u-bracket at the top of the pocket and mark the bottom portion to be cut out with a rotary tool ● Drill two ¼” holes using the u-bracket as a guide in the back of the pocket ●...
- Page 4 Radio & Dash Kit Installation ● Slide the dash panel with the bevel and MB Quart logo facing outward like the image ● Pass the wires from the radio through the hole below the u-bracket in the pocket ● Install four M4 cap head bolts...
- Page 5 Radio & Dash Kit Installation ● Install covers on each side of radio Page 5 of 7...
- Page 6 Reassembly ● Install half mud guard with six push pins ● Install four 10mm bolts, four push pins, and five 5mm allen bolts to remove top of dash ● Install hood by turning two latches Page 6 of 7...
- Page 7 The Bluetooth ® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use such marks by MB Quart is under license. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this literature are for identification purposes only.
Need help?
Do you have a question about the MBQT-RAD-1 and is the answer not in the manual?
Questions and answers