Charging Instructions (Battery Attached) - Ryvid Anthem 2024 Owner's Manual

Charging Instructions (Attached to Anthem)
The Anthem battery may be charged while mounted to the bike, or separately from the bike. To
begin charging the battery on the bike, simply connect the charge cord to a power source. The
charger will then engage, and the charger fan will operate. Note that the bike may be powered on
or off to begin charging. If the bike is turned on and charging, park mode will be engaged, and the
throttle will not be active. To check the State of Charge (SOC), turn the bike on. The charge level
indicator will flash while charging and indicate the current charge voltage and percentage. When
the charge cycle is completed, the fan will stop, and the dash will indicate a full (100%) SOC.
CAUTION: If the bike is being prepped for storage at the recommended 50% state of charge,
simply unplug the charger when the dash indicates approximately 50% SOC.
Insert Charge Cable
Remove Charge Cable
57
Battery - Charging