Download Print this page

ABM raceClip Installation Manuals And Safety Information

For suzuki gsx-r 1000 from model year 2017

Advertisement

Quick Links

raceClip
Manual and safety information
SUZUKI GSX-R 1000
From model year 2017
• www.ab-m.de ••• info@ab-m.de •

Advertisement

loading
Need help?

Need help?

Do you have a question about the raceClip and is the answer not in the manual?

Questions and answers

Summary of Contents for ABM raceClip

  • Page 1 ™ Manual and safety information SUZUKI GSX-R 1000 From model year 2017 • www.ab-m.de ••• info@ab-m.de •...
  • Page 2: Important Safety Advice

     It is your responsibility to check the product regularly and to determine if a service or replacement is required.  Please bear in mind that the raceClip is a safety-relevant part of your vehicle. After a fall or an impact, check the handlebar and if there is even the slightest indication of damage, completely replace it.
  • Page 3: Installation

    ™ Installation manual raceClip for SUZUKI GSX-R 1000 from 2017 Preparation  Please read the entire safety information and installation manual carefully.  A motorcycle not securely positioned can fall over during the following work. Therefore, make sure that the motorbike is positioned on solid, flat ground and is secured against falling over and rolling away.
  • Page 4 ™ Installation manual raceClip for SUZUKI GSX-R 1000 from 2017 To facilitate a modification, we can offer you the following options:  Stainless steel brake line(s) for brake or clutch in appropriate length.  We can extend cables (e.g. throttle cables) upon request. To do this, please indicate the extension measurement when sending the cables.
  • Page 5 (torque according to manufacturer's specifications). Push the clamps upwards to the top yoke. Information: The clamp area of the raceClip is approx. 4mm longer than the forks’. Therefore it is not completely used. Completely push both bars into the clamps and attach using the four short screws.
  • Page 6 ™ Installation manual raceClip for SUZUKI GSX-R 1000 from 2017 Push throttle grip, brake pump, clutch and control armatures onto the handlebar and stick on the rubber grip. Clip in clutch cable and adjust. Attach the original brake fluid reservoir with the holder provided to the handlebar.
  • Page 7: Final Check

    ™ Installation manual raceClip for SUZUKI GSX-R 1000 from 2017 Final check  Make sure that all operating elements present on the handlebar are adequately positioned, even in maximum steering angle. The brake pump and the storage tank must be located in an adequate operating position.
  • Page 8 ™ Installation manual raceClip for SUZUKI GSX-R 1000 from 2017 • Revision: 00 • 03/03/2017 • © ABM Fahrzeugtechnik GmbH Page 8 of 8...