Summary of Contents for GENERAL ECOLOGY SEAGULL IV X-1F
Page 1
Follow steps 1 through 6 for installation. Steps A through F, found on page 8, are additional instructions for cartridge changing. Confi guration dimensions are shown on page 7. General Ecology, Inc.’s X-1 and X-2 drinking water purifi cation systems are designed to operate 25 to 125 psi. For cold water use only.
Page 2
Braided Connector Hose 800354 RS-1SG Purifi cation Cartridge 788000 12 a” Compression Thread Tee 714360 X-1 Housing — Housing Gasket (Blue) 710550 Visit our web site and order online at V-Clamp for Housing 710534 www.generalecology.com General Ecology, Inc. — 2...
Page 3
700060 Braided Connector Hose 800354 RS-2SG Purifi cation Cartridge 789000 12 a” Compression Thread Tee 714360 X-2 Housing — Housing Gasket (Blue) 710550 Visit our web site and order online at V-Clamp for Housing 710534 www.generalecology.com General Ecology, Inc. —...
See parts illustration on page 2. installed on the cold water supply line. Do not overtighten. Fitting (possible cold water line connections) Figure Capped T Elbow Cold Water Line Cold Water Line Cold Water Line General Ecology, Inc. — 4...
Page 5
STEP 3 Installation Connecting X-1/X-2 System with FP Faucet General Ecology, Inc. FP Faucet is designed to fi t a mounting hole p” diameter. If a suitable hole is not available, prepare by referring to Mounting Hole Pattern on page 7.
Page 6
Also, some black “fines” from inside of cartridge may flow with the first few gallons of water. These are harmless, if consumed, or may be discarded. Figure Figure Figure INSERT HERE QUESTIONS? Call 1-800-441-8166 for Customer Service General Ecology, Inc. — 6...
Faucet Care Instructions General Ecology FP Faucet Dimensions General Ecology purifiers and faucets are manufactured with the finest components available. However, they require proper care to keep them looking their best. If properly cared for, these finishes can provide a lifetime of elegance. Chrome finishes can be damaged by abrasive cleaners, in spite of their hardness.
Need help?
Do you have a question about the SEAGULL IV X-1F and is the answer not in the manual?
Questions and answers