2_DTH8045E_en.qxd
12/04/05
10:22
Page 65
Menus
Standby mode
Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select On to enable this function.
Note: the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.
AV link
Allows a television set to control your DVD recorder and download the
EN
EN
same channels to the same numbers during installation of channels (page 6).
Note: this function is positioned by default on On.
AV2 Input
Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB
Scart connector
(DTH 8045), S-Video or CVBS. If you do not know the type of signal
supplied by the connected device, try each of the settings to obtain the best
result.
Note: format of image signals:
DTH 8045 - RGB: English signal colour code (Red – Green – Blue). This is best
quality.
S-Video: S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS: composite video signals. This is poor quality.
65