Standby Mode; Av Link; Av2 Input - THOMSON DTH8060 User Manual

2_DTH8060_en.qxd 17/08/05 12:22 Page 65
Menus

Standby mode

Your DVD recorder has an Eco Standby to reduce its power consumption
when on stand-by. Select On to enable this function.
Note: the Eco function does not allow the display of programming warning messages
on the display panel. Only the record icon will flash.

AV link

Allows a television set to control your DVD recorder and download the
E N
E N
same channels to the same numbers during installation of channels (page 6).
Note: this function is positioned by default on On.

AV2 Input

Choose the S-Video or Video signal, depending on the device connected to
the AV2 Scart socket (usually a satellite or cable receiver), select RGB,
Scart connector
S-Video or CVBS. If you do not know the type of signal supplied by the
connected device, try each of the settings to obtain the best result.
Note: format of image signals:
RGB: English signal colour code (Red – Green – Blue). This is best quality.
S-Video: S-VHS (Y/C), signals with separate colour components and brightness. This is
average quality.
CVBS: composite video signals. This is poor quality.
65