Table of Contents
Advertisement
2_DTH8040_42_en.qxd
Remote control
The remote control handset supplied with your DVD recorder is a 3 in 1 type remote control. It
allows 3 devices to be controlled: your DVD recorder, a television set and a satellite or cable
receiver.Thus you have remote control of all these devices by using the 3 modes: DVD,TV or
SAT.CABLE that are accessed by 3 corresponding keys.This page describes the keys that control
your DVD recorder (in DVD mode).
Note: the functions described below depend on the discs and/or the files read.
For description of the TV and SAT.CABLE functions, see the following page.
Description of keys in DVD mode
7/07/04
9:31
Page 16
Signal lamp
is being used to program or to control another device. It also
indicates that the batteries level is low by flashing several times
when a key is pressed.
DVD
PR
RETURN
MENU
CLEAR
OPEN . CLOSE
ZOOM
INFO
SHOWVIEW
ANGLE
0 to 9
TV . VIDEO
REV
PLAY
FWD
REC
STOP
PAUSE
AGAIN
ADVANCE
- this shows the status of the remote control when it
Switches the DVD recorder on or off.
Sets the remote control unit in DVD mode (by
pressing once), enabling you to control your DVD
recorder.
Skips forward or backward a chapter (DVD) or
track (CD).
Returns to the previous menu.
Displays the DVD disc menu while a disc is being
played.
Removes the menu or banner showing on the TV
screen.
Opens and closes the disc holder of the DVD
recorder.
Enlarges the picture during playback, slow motion
or pause mode.
Displays the DVD recorder information banner on
the TV screen while a disc is being played.
Display programming screen with guide number.
To access a choice of angles of an image if available
on the disc.
(JPEG) To rotate an image through 90°.
Keys used to enter information such as a chapter
or track number, or to make choices from menus.
Passes DVD images to the television set connected
to AV1.
Fast backward while a disc is being played.
Plays a disc.
Fast forward while a disc is being played.
To record the TV program watched onto the
recordable disc (DVD+R / DVD+RW).
Stops disc playing or recording and displays the
DVD player menu.
Pause during playback (CD) or pause on an image
(DVD).
Skips backward – each press replays the last
seconds during DVD playback.
To skip forward approximately 30 seconds (DVD)
or to play another track (audio CD).
16
Advertisement
Table of Contents
