Table of Contents
Advertisement
Connections and Setup
EN
Component cable
S-Video cable
Audio/video cable
DVD EXCLUSIVE COMPONENT/PROGRESSIVE SCAN
VIDEO OUT sockets
The Y, Pb, Pr sockets provide optimum picture quality
because the video signal is separated into three parts.To
ensure maximum picture quality, use three video-grade
cables (yellow) for the connection.You can also buy
bundled component video cables that are colour-coded
to match the Y, Pb, Pr sockets (red, green and blue).
Notes:
Remember to connect the audio cables because the
component cable carries only the picture signal, not the sound.
If you use the YPbPr socket to connect the DVD/VCR to the
COMPONENT/
television set, set the TV Output Select option in the
PROGRESSIVE
Display menu to YPbPr (see page 31).
SCAN VIDEO OUT
socket
If your television is a high definition television, you may take
advantage of the DVD player's progressive scan output to get
the highest possible video resolution. In that case you need to
set the Progressive Scan option in the Display menu to
On (see page 31).
S-VIDEO OUT socket
The S-VIDEO OUT (separate video) socket provides
better picture quality than composite video (the VIDEO
OUT socket) because the colour is kept separate from
the black and white part of the video signal. If your TV has
S-VIDEO OUT
an S-Video socket, connect the DVD/VCR to the TV with
socket
an S-Video cable (not supplied).
Note: Remember to connect the audio cables because the S-
Video cable carries only the picture signal, not the sound.
Front panel audio and video sockets
Connect your camcorder to the AUDIO L (left),AUDIO
R (right) and VIDEO sockets located at the front of the
DVD/VCR using an audio/video cable (not supplied).
VIDEO IN and
AUDIO IN L and R
sockets
8
Advertisement
Table of Contents
