Copying From Dvd To Vcr - THOMSON DTH6300F - annexe 1 Manual

Recording
Changing or deleting timer events
To change a recording event:
1. Press to access the main menu.
2.
Use and
3.
Press .
OK
4. Press and
5.
Press to delete an entry.
6.
Press
OK
change and the
EN
7.
Press to save your settings.
VCR
8.
Press again to remove the menu.
9. Put the DVD/VCR in standby mode by pressing the
appears on the front display.The video recorder is now ready to record at the time you have
specified.
Note: If timer events overlap, the earlier programme will be given priority.

Copying from DVD To VCR

This unit allows you to copy the contents of a DVD to a video tape.
Notes:
Be sure to set the Progressive Scan option to Off in the Display menu (see page 31).
If the DVD you are attempting to copy is copy protected, you may not be able to copy the disc.
1.
Insert the disc you wish to copy in the DVD player and close the disc tray.
2.
Insert a blank videotape into the VCR.
3.
Press the
DVD player goes into Play mode and the VCR goes into Record mode.
Notes:
If the DVD disc menu appears, you may need to press the
If you copy from DVD to VCR, make sure that the DVD/VCR is in DVD mode.
4.
When playback is completed, press
Note:You must stop the copying process manually when the disc playback is completed, or the unit may
replay and record over and over again.
to select REC
REC
to select the timer slot that you wish to change.
to edit that entry. Use the
and buttons to change those sections.
button on the remote control or the
RECORD
.
and buttons to select the section you wish to
button on the remote control.
button to begin copying.
PLAY
to end the recording.
STOP
16
button on the front panel.The
REC