Table of Contents
Advertisement
Connections and Setup
Manual installation
To complete the set-up of your video recorder when the automatic channel set-up has not stored
all the channels or when you wish to store a new channel.
1.
Turn on your television and your DVD/VCR. Select the AV channel on your television, press
the
button and then press to access the main menu.
VCR
2.
Press the
3.
Press again and the television channel table appears.
4.
Use the
5.
Press the
network channels).
EN
PR
CH
09
C - -
PAL
SECAM
P SET
R
7.
The station can be fine tuned to improve picture quality. Select MFT (Manual Fine Tuning)
using the
8.
Select STATION by pressing the
PR
CH
06
C40
P SET
R
11.
Press to confirm.
12.
Press again to remove the menu.
13.
The new channel is now stored into your video recorder.
If you wish to install manually other channels you should repeat the above procedure.
To sort the new channel, see "Sorting the channels" on page 9.
Note: If it is necessary for you to tune all the channels manually you may find it easier if you write the CH
numbers down for each channel as you find them.You can then select each channel from the main menu and
type the CH numbers in directly. Each channel will then be in the correct position so there is no need to sort
them later.
and
buttons to select PR SET
and
buttons to select the programme number you want to tune, then press
AV
key to select C (for channels received via your roof aerial) or S (for cable
MFT
STATION
00
OK i
and
buttons. Use the
TF1
FR2
FR3
ARTE
MFT
RTP1
00
RTP2
RTPAF
RTPAZ
OK
i
then press
P SET
R
6.
Press
and select the colour system of the channel
OK
by pressing the
Press
, and then use the
OK
search for the channel of a programme or enter the
channel number using the numbered buttons.
and
buttons to adjust the picture.
button. You can then name your station.
9.
Press
OK
to reveal the television channel name list.
Use the
and
from the list. Press
10.
If the station name you require is not listed you can
insert one manually. Press the
appears beneath the first letter. Use the
buttons to select letters and numbers for the new
channel name up to a maximum of 5. Press the
buttons to pass on to the previous or next
character. Press
OK
10
OK
.
and
buttons.
and
buttons to
buttons to choose a channel name
to select it.
OK
button.A flashing bar
.
.
OK
and
and
Advertisement
Table of Contents
