Programming A Recording - THOMSON DTH6100 Manual

Recording

Programming a recording

Programming a recording can be done up to one month in advance with up to seven recordings
being pre-programmed. Ensure the television channels have been tuned and stored correctly and that
the clock is set to the correct time.
Programming a recording using the S
Each television broadcast has its own S
magazine.To programme the recording of a broadcast, all that is required is for you to enter this
number in the S
channel broadcasting the programme.
S V is a registered trademark of Gemstar Development Corporation. The S
HOW IEW
EN
manufactured under licence from Gemstar Development Corporation.
VCR
1.
Press the
DAILY
SHOWVIEW
REC
The data corresponding to the entered S
• If PLEASE CHECK appears, check the number and re-enter it.
• If - - appears, enter the programme number of the channel. It will automatically be stored in
the internal S
5.
To change one of the settings, select it using the
PR DATE
BBC2 15
CH4 8
MTV 2
- - - -
- - - -
- - - -
- - - -
VPS/PDC :
7.
Press to select the recording speed. Use the
Play (SP), Intelligent Play (IP) and Long Play (LP).
Notes:The IP feature adjusts the recording speed to quantity of video tape left. It switches speed from SP to
LP if there is not enough tape left to record the whole programme in SP mode.
The IP feature is not available when VPS/PDC is on.
8.
Press the
have entered a wrong data. Please correct the data.
9. Press the
10.
Put the DVD/VCR into standby mode by pressing the
appears on the front display to show that the video recorder is set to record.
V menu; it contains the date, start and end time and the number of the
HOW IEW
button and then the
VCR
12345
0~9, OK i
V channel map.
HOW IEW
TIME
13 : 00~14 : 00 LP
19 : 30~20 : 00 LP
20
: 00~20 : 30 SP
- - : - - ~ - - : - - SP
- - : - - ~ - - : - - SP
- - : - - ~ - - : - - SP
- - : - - ~ - - : - - SP
ON
OK i
button to store your settings. If the message PLEASE CHECK appears, you
button to exit the menu.
® numbers
V
HOW IEW
V number guide which can be found in your TV
HOW IEW
button to access the S
TIMER
2.
Select the the frequency of the recording using the
and buttons: ONCE (recording of a single
programme), DAILY (daily recording from Monday to
Friday) or WEEKLY (recording of a weekly
programme).
3.
Use the number buttons to enter the S
number of the broadcast you want to record.
4.
Press .
ok
V number are displayed.
HOW IEW
and
6.
Press the button to select the VPS/PDC function
and activate or deactivate it using
Note: Some channels telecast their programmes with VPS (Video
Programme System) or PDC (Programme Delivery Control)
signals. These signals detected by the video recorder allow
accurate triggering and stopping of a recording, whatever the
delay of the programmes.
and
button on the remote control.
12
V system is
HOW IEW
V menu.
HOW IEW
HOW
buttons.
and
buttons to scroll options: Standard
V
IEW
.