Programming A Recording - THOMSON DVD Player + TV Set + VCR Owner's Manual

Programming a recording

Programming a recording can be done up to one month in advance with up to seven recordings being
pre-programmed. Ensure the television channels have been tuned and stored correctly and that the
clock is set to the correct time.
Programming a recording using the S
Each television broadcast has its own S
magazine.To programme the recording of a broadcast, all that is required is for you to enter this
number in the S V
HOW
channel broadcasting the programme.
S V is a registered trademark of Gemstar Development Corporation. The S
HOW IEW
manufactured under licence from Gemstar Development Corporation.
1.
Press the button and then the
VCR
SHOWVIEW NO.
- - - - - - - - -
ONCE
REC
PR DATE TIME
CH4 12 10 : 11 11 55 ~
- - - - - - - - - - - - : ~
- - - - - - - - - - - - : ~
- - - - - - - - - - - - : ~
- - - -
- - - - - - - - : ~
- - - -
- - - - - - - - : ~
- - - -
- - - - - - - - : ~
6.
Press the button to select the VPS/PDC function and activate or deactivate it using
.
Note: Some channels telecast their programmes with VPS (Video Programme System) or PDC (Programme
Delivery Control) signals.These signals detected by the video recorder allow accurate triggering and stopping
of a recording, whatever the delay of the programmes.
7.
Press to select the recording speed. Use the
Play (SP), Intelligent Play (IP) and Long Play (LP).
Notes:
The IP feature adjusts the recording speed to quantity of video tape left. It switches speed from SP to LP if
there is not enough tape left to record the whole programme in SP mode.
The IP feature is not available when VPS/PDC is on.
HOW
V
HOW IEW
menu; it contains the date, start and end time and the number of the
IEW
TIMER
2.
Select the the frequency of the recording using the
and
programme), DAILY (daily recording from Monday to
Friday) or WEEKLY (recording of a weekly
programme).
3.
Use the number buttons to enter the S
number of the broadcast you want to record.
0~9, OK i
Note: If you make a mistake, press
number.
4.
Press
The data corresponding to the entered S
number are displayed.
• If PLEASE CHECK appears, check the number and re-
: SP
: SP
enter it.
: SP
: SP
• If - - appears, enter the programme number of the
: SP
: SP
channel. It will automatically be stored in the internal
: SP
S
HOW
i
5. To change one of the settings, select it using the
and
correct information.
® numbers
V
IEW
number guide which can be found in your TV
button to access the S
buttons: ONCE (recording of a single
OK .
V channel map.
IEW
buttons.Then press
and buttons to scroll options: Standard
15
Recording
V system is
HOW IEW
V menu.
HOW IEW
V
HOW IEW
then enter the correct
V
HOW IEW
and to enter the
and
EN
VCR