Playback
Load a tape and press
Stopping playback
Press the
STOP
Accelerated play
While a video tape is playing you can search the tape forward and backward to look for a specific
position on the tape. Press
The picture will be shown at seven times normal play speed.
EN
Fast Forward / Rewind
VCR
Press
then press either
STOP
Whilst you are rewinding or fast forwarding you can view the section you are passing. Press and
hold (for a few seconds) either
recorder to normal rewind or fast forward operation.
Variable playback
Use the
and
a list of available speeds:
x 1 = slow motion
x 2 = freeze frame
x 3 = reverse playback
x 4 = reverse playback 3x speed
To resume normal playback, press
Note: During slow motion, noise bars may appear on the picture according to the status of tape. If distortions
can be seen in the picture, reduce them with the
Still image
Press the
PAUSE
of black and white horizontal lines.This is perfectly normal and does not mean that the video tape
is damaged.
Note: Freeze frame cannot exceed five minutes. After five minutes, the video recorder automatically stops.
Frame Advance
1.
Press
PAUSE
Note:You can use the
2.
Press
PLAY
Ejecting the tape
OPEN . CLOSE
Press
Note: If the end of the tape is reached, the video recorder automatically stops, rewinds, ejects the tape and
goes into standby mode.
.
PLAY
button on the remote control to stop playback.
or
REV
FWD
for rewind or
REV
or
REV
buttons to adjust playback speed during playback or for freeze frame. Below is
PLAY
button for freeze frame.This picture may display some interference in the form
repeatedly to advance forward image by image.
and
buttons to reduce any vertical movement seen on the still picture.
to return to playback.
on the remote control or
Basic playback operations
to make the tape play rapidly backwards or forwards.
for fast forward.
FWD
. Releasing the button will return the video
FWD
x 5 = reverse playback 7x speed
x 1 = playback 2x speed
x 2 = playback 7x speed.
.
and
buttons.
on the front panel to eject the tape.
EJECT
10