Selecting A Rhythm - Hartke LOOP HL77 Manual

Rhythm Tracks
10
Playing the Rhythm Track
Press the RHYTHM or TAP TEMPO button to turn on the rhythm track.
Use the RHYTHM knob to adjust the volume of the rhythm track.
Note: The default sound is the metronome click. The TAP TEMPO button flashes to indicate the tempo.
If you start the rhythm after the loop has been recorded, the HL77 will automatically detect the tempo
of the loop.

Selecting a Rhythm

Press and hold the RHYTHM button for 2 seconds.
The pattern number will start flashing in the display.
Press the PATTERN UP and DOWN buttons to choose a pattern.
Setting the Tempo of the Rhythm Track
It is not possible to change the tempo during recording or overdubbing. You can set the tempo before
you start recording.
When playing back a saved loop or phrase, you can change the tempo by pressing the TAP TEMPO
button at the desired tempo rate.
Note: You can only change the tempo of loops or phrases that have been saved to a memory location.