12. FRONT HEATER
On the inside of the sauna, connect the cable with the white connector from the floor panel
to the white connector from out of the underside of the front heater:
Find the gray cable coming out of the floor panel. Feed this cable through the bottom of the
heater casing (round hole), then out through the rectangular hole in the back of the heater
casing. Insert the end of the gray cable into the black connector which is fixed inside the
front panel within the rectangular opening shown here. Notice the locking tab on the
connector faces toward you:
Tuck as much of the cables into the holes as you can so that they are out of the way.
Notice the metal hook in the right-side panel and the corresponding metal hook on the
24
© 2023 High Tech Health International, Inc.
MTR1B-20230320A
Need help?
Do you have a question about the TRANSCEND TR-1 and is the answer not in the manual?