Advertisement

Quick Links

High Pressure
Washer User's
Manual
YL4661C-120C
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Please read and comply with
these original instructions prior to the initial
operation of your appliance and store them
for later use or subsequent owners.
Apart from the notes contained herein the
general safety provisions and rules for the
prevention of accidents of the legislator
must be observed.
Warnings and notes that are attached on
the appliance provide important notes for
the safe operation.
Hazard levels
DANGER
Pointer to immediate danger, if not
avoided, which leads to severe injuries or
death.
WARNING
Pointer to a possibly dangerous situation, if
not avoided, which can lead to severe
injuries or death.
CAUTION
Pointer to a possibly dangerous situation, if
not avoided, which can lead to minor
injuries.
ATTENTION
Pointer to a possibly dangerous situation,
which can lead to property damage.
Electric components
DANGER
Risk of electric shock.
Never touch the mains plug and the socket
with wet hands.
Check the power cord with mains Plug for
damage prior to every use. Do not use the
machine if a supply cord or important parts
of the machine are damaged, e.g. safety
devices, high pressure hoses, trigger gun.
All current-conducting parts in the working
area must be protected against jet water.
The mains plug and the coupling of an
extension cable must be watertight and
must never lie in water. Moreover, the

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the YL4661C-120C and is the answer not in the manual?

Questions and answers

Summary of Contents for TOLSEN TOOLS YL4661C-120C

  • Page 1 Washer User's not avoided, which can lead to severe injuries or death. Manual CAUTION Pointer to a possibly dangerous situation, if YL4661C-120C not avoided, which can lead to minor injuries. IMPORTANT SAFETY INSTRUCTIONS ATTENTION Pointer to a possibly dangerous situation, SAVE THESE INSTRUCTIONS which can lead to property damage.
  • Page 2: Safe Handling

    coupling may never lie on the ground. The from the cable drum. use of cable reels that ensure that the An unsuitable electrical extension cable can sockets are at least 60 mm above the be hazardous. ground is commended. Safe handling Make sure that the power cord or extension cable is not damaged by running over, DANGER...
  • Page 3: Other Risks

    Do not use the appliance within range of long as it is in operation. persons unless they wear protective ATTENTION clothing. In case of extended breaks, switch the Wear appropriate Personnel Protection appliance off at the main switch or pull the Equipment (PPE) while operating the mains plug.
  • Page 4 appliance must never be used on the →Keep hands warm. drinking water net without a system →Take breaks at regular intervals. Working separator. Ensure that the connection of with detergent your building water installation on which the high pressure cleaner is operated is WARNING equipped with a system separator pursuant The improper use of detergents can cause...
  • Page 5: Safety Devices

    parts. A double-insulated product is This lock locks the lever of the trigger gun marked with the words “Double and prevents the inadvertent start of the Insulation” or “Double Insulated”. appliance. Overflow valve with. Residual risks Water that has flowed through backflow preventers is considered to be non-potable.
  • Page 6: Proper Use

    Symbols on the machine system, the system shall be protected against backflow. This high pressure cleaner is designated The high pressure jet must not with a rated input current. The intended use be directed at persons, animals, live of this product covers the cleaning of electrical equipment or at the appliance vehicles, buildings, terraces, facades and itself.
  • Page 7: Description Of The Appliance

    Description of the Appliance Technical specifications Voltage 220-240V ~ Frequency 50Hz Watt 1500W Protection Class Degree of IPX5 protection Rated pressure 8MPa Allowable pressure 12MPa Handle Rated flow 6.0l/min 2. Trigger gun Max. flow 7.0l/min 3. Power cord hook Max. inlet pressure: 0.7Mp 4.
  • Page 8 1.Slide the handle into position 4. Installing the spray wand with two screws. • Fit the spray wand into the gun and rotate it until the two parts are completely locked. 2. Slide the trigger gun holder into position of unit left . 5.
  • Page 9 6. Connect the high-pressure hose Start up to the water outlet Park the appliance on an even surface. Connect the other end of the high-pressure Insert the mains plug into the socket. hose to the water outlet on the washer and Water supply twist the black rotatable end-piece as indicated to secure the connection.
  • Page 10: High Pressure Operation

    • Release the lever of the trigger gun. • Lock the lever of the trigger gun. Operation ATTENTION Dry running of more than 2 minutes leads Connect the product to power and water to damage of the high-pressure pump. If supply as described.
  • Page 11: Operation With Detergent

    cleaned and press the trigger. pressure Met. Release the lever of the trigger gun; the After operation with detergent device will switch off again and stop the water jet. High pressure remains in the • Remove the hose clean detergent bottle system.
  • Page 12: When Transporting By Hand

    • Release the lever of the trigger gun. occur during transportation in vehicles. • Secure the appliance against shifting and • Lock the lever of the trigger gun. tipping over. ATTENTION • When disconnecting the supply or high Storage pressure hose, warm water may leak from the connection after operation.
  • Page 13: Frost Protection

    temperature is between 10 °C and 30 °C. Prior to all work on the appliance, switch off Store the power washer indoors to prevent the appliance and pull the power plug. the water in the unit from expanding under High pressure hose freezing conditions.
  • Page 14 wand from the gun. Remove any dirt from the nozzle hole and rinse. ATTENTION • The sieve must not be damaged. • Pull the sieve out using flat pliers. • Clean the sieve under running water. • Reinsert the sieve into the water connection.
  • Page 15: Troubleshooting

    Troubleshooting DANGER Risk of electric shook. Turn off the appliance and remove the main plug prior to performing any care and maintenance work. Repair work and work on the electrical components may not only be performed by an authorized customer service. You can rectify minor faults yourself with the help of the following overview.
  • Page 16 water comes out No water supply thaw. Connect inlet water. Water filter blocked /Nozzle Clean the filter /Clean the nozzle blocked...
  • Page 17: Warranty

    Accessories EC declaration of Conformity A choice of accessories is supplied in the We hereby declare that the machine scope of the delivery of this product. Please described below complies with the relevant check the technical specification of any basic safety Directives, both in its basic accessories that you purchase to ensure design and construction as well as in the they are compatible with this product.
  • Page 18 The undersigned act on behalf and under the power of attorney of the company management. Authorized Documentation Representative...

Table of Contents